It is several times faster than a DVD. Use a USB flash drive to install the Vista system.

IT sounds incredible to use a USB flash drive to install vista. In fact, this was proposed by a foreign IT industry expert!
The reason is simple. He said that using a high-speed USB flash drive to install Vista is several times faster than using a DVD. Generally, it takes about one hour to use a hard disk and 20-25 minutes to use a CD, however, it takes only 5 to 10 minutes to install the flash drive!

Generally, the size of the vista installation disk must be between 2-GB. We should first configure a large USB flash disk, at least we can accelerate the system, and then how can we keep the copy file! Don't be reluctant. Please note that the disk space must be sufficient. Otherwise, when you run to create partition primary, the system will prompt you that the disk space is insufficient, indicating that you cannot use this method to install Vista!

Simply do not practice, take a look at the specific steps below:

Start from the computer and press F8 to BISO. Change the drive to USB flash drive!

Format Disk:

(1) enter your command prompt.

(2) input X (where X represents the volume mark of your USB flash drive): ENTER

(3) In X: cmd

(4) input as prompted

1. diskpart

2. select disk 1

3. clean

4. create partition primary

5. select partition 1

6. active

7. format fs = fat32 (do you still have to remember how to convert the FAT32 format to the NTFS format ?)

8. assign

9. exit

Note that the above commands assume that the USB flash disk is recognized as disk 1!

After completing the above steps, we will copy our Vista installation software to a large USB flash drive. Enter the following command xcopy d :*. */s/e/f e: The execution file is automatically copied! Restart the computer and install it. Please wait for 5 to 10 minutes!

Note: After vista is installed, start the USB flash drive and start it on the hard disk.