1. Set it on the host and allow other users to remotely use it through verification.
2. Obtain the local IP Address
3. log on to the user terminal and use the Remote Desktop through verification.
Start command: mstsc.exe
The above IP address is filled with the IP address of the control terminal.
4. Select a connection and enter the user name and password of the controlled end. After the connection is correct, only the connection can be established.
5. Use Remote Desktop to shut down the computer or perform other operations (because the Remote Desktop can only be disconnected or canceled)
Go to CMD and run the shutdown command.
ShutdownShutdown-s-t 0 restart shutdown-r-t 0
Common Parameters of the shutdown command:
/? -- Display help information
/L -- logout
/S -- disable the computer
/R -- disable and restart the computer
/A -- cancel the stop operation.
/H -- sleep the local computer.
/T XXX -- set the timeout before closing to XXX seconds. If XXX is not added, the default value is 30 seconds.
/F -- force the running applicationProgramDisable without warning the user beforehand