Make the VC True Color toolbar (I finally understand the benefits of blog writing !!!)

Previously, when I used PNG images as the tool bar, I downloaded multiple tools and used multiple processes. Due to compatibility with the BCG library, the effect was not very good, because the image will appear in the background, it is quite unfriendly (it is difficult to see). After suffering from all the difficulties, I finally made the True Color toolbar, but I need to add icons in the past two days, I forgot the steps !!!! We hereby record it to prevent further forgetting!

First, the icons on the toolbar are mostly 32*32. Therefore, after downloading images in PNG format, you need to convert them to 32*32 (pixel here), using ps, iconworkshop, you can use any one of the magic photos, but the following steps are required to combine these images into a toolbar:

1. Open the iconworkshop ApplicationProgramCreate an image belt for the toolbar. the initial number of icons is 10. You can add it later, for example:

2. Drag the required icons to the software interface to open the interface. Then, run the "add to library" command on each image.

3. Place the toolbar image at the front-end, add the icon to the library in the lower left column of the software, and drag the icon to the image band (note the subscript selection of the image, otherwise, the previous icon will be overwritten)

 

4. Last step: add the image to the library and then export it. This beautiful toolbar has been created! I would like to share with you that you are welcome to shoot bricks (⊙ o ⊙ ).