Overview of home SOHO router Internet access configuration

Vro Internet access configuration is an important part of Route configuration. This section describes the Internet access configuration of the home SOHO router for home users in detail. With the popularization of ADSL, in order to share Internet access, SOHO broadband routers are also beginning to enter thousands of households, but many people will not use this fashionable thing. Next I will briefly introduce the internet configuration of this family-type router: let's take TP-link R402 as an example ).

1. Connect the line, and connect the wan port to the Internet, that is, ADSL or other broadband). Connect the LAN port to the Intranet, that is, your computer Nic;

2. Each vro has a default IP address. Check the instruction manual and check that my IP address is 192.168.1.1;

3. Configure your computer's IP router to access the Internet as 192.168.1.x. The Gateway and dns point to the router, that is, 192.168.1.1;

4. Open Internet Explorer on your computer and enter http: // 192.168.1.1/to go to the router's Internet configuration interface;

5. When the general instruction manual arrives, you can browse the Web page smoothly. In fact, we find that our computer cannot access the network. This is mainly because the mac address of the router is strange, find the clone mac address option and select clone mac address. Then, you can access the Internet.

6. Note that some routers do not have the mac address clone option, so we only need to manually modify the mac address of the router, enter the IP address of your computer's Nic In the mac address option of the vro. To obtain the mac address of your Nic, enter the command prompt, enter "ipconfig/all" in the win2000/xp operating system and press Enter. You can see a string of characters (for example, 00-E0-4C-9-B4-43), which is the mac address. Now, I believe everyone can access the Internet smoothly. There are many other functions in the vro. You can refer to other articles on this site to optimize the router's Internet access configuration.

DHCP service for vro Internet access configuration

Open the web management interface of the Broadband Router, find the DHCP option, select "enable DHCP service", and then specify the dynamic IP address range of the address pool to be dynamically allocated through the router. On the client PC) side, set TCP/IP to automatically obtain the address and DNS.

1. Filter access ports

The network is set based on the ports to be accessed by different protocols. For example, if QQ uses ports 4000 and 8000, we only need to block these two ports, you can restrict the use of QQ on computers in the LAN. Others are similar, such as TELNET (23), HTTP (80), and DNS (53.

2. Filter MAC addresses

I believe everyone knows that the MAC address is equivalent to the ID card of each Nic, and each address is unique in the world. You can block access to the Internet by shielding the MAC address of a host Nic on the router's Internet Configuration side.

3. Filter website addresses

This function is intended to be used at a Glance. You can enter the website address you want to filter to prevent your machine from accessing and modifying the website. It is suitable for filtering illegal websites and yellow websites. It should be added that these are common methods and are not impeccable and suitable for general household use.