Production ideas: Using the Channel mixer is the color principle of the channel to create a simple and beautiful green tones
Effect comparison
1. Open the picture first. This is a good picture, the film itself is also very good feeling is too common. I'm going to change the overall tone and make her feel different.
2. Click the "Create Fill or Adjust Layer button" below the layers panel to select the Channel mixer option. In the pop-up dialog box, change the output channel to "blue" and adjust the source channel below: Blue channel +4 green channel +70 (This step if the blue channel is 0 green 100 is equivalent to the green channel covered with the original blue channel). Just out of the picture below the faint green yellow tone This is also good oh! But not what we want. Continue to increase the green channel to a bit +102 is not cyan dominated. Here to illustrate the use of this method can quickly produce a green, yellow tones you can try the other channel here is not to elaborate
3. Observe the face of the person you will find, (⊙o⊙)! Why is the face so red and so harmonious oh, the following to adjust these red. Methods a lot of my choice of color balance, of course, you can use the optional color, hue saturation, etc.
4. Or the "Create fill or Adjust Layer button" below the Layers panel, select the Color balance option. I want to separate the image of the dark, midtones, high light adjustment, the specific parameters as shown in the figure
5. After the adjustment of the previous step to see the face harmonious point bar. But it's a little over. Now it's just a matter of reducing the transparency of the adjustment layer by the color balance. Try me down to 55% and feel right. O (∩_∩) o~ accomplished. There may be some slight inappropriate. You can try again with the optional color to further adjust. I wish you all a happy study.
Classification: