We will give you a detailed analysis of the photoshop software to share with you the tutorial on how to design the superb Facula text effect.
Tutorial sharing:
I. Sketch
1. Create a new layer W: 42.5, H: 59.4, 300 dpi, and CMYK.
Quickly draw a heart shape with a paint brush.
2. Draw a text sketch. If you think it is just a sketch, you can draw it on the paper and scan it on the computer ~
3. This is very simple. Use a pen tool to hook up your words ~
(The original tutorial is to be executed in AI. I adapted it for a moment ~ It can be done anyway, that is, Wang Dao, wakakaka)
2. Create more lines
1. Save the path outlined by the pen in the path.
2. Set the paint brush, soft edges, 10 pixels, and opacity of 100%. Return to the pen tool to draw edges without simulating pressure.
3. Filter> blur, 60 °, and 20 in size. Click OK.
4. Change the transparency to around 50% ~ Add a mask and hide a part with a black brush.
5. In the path layer, find the path you saved and use the pen tool to slightly adjust it. The approximate shape is shown in the following figure ~
6. The stroke is still 10px. To make the word effect more realistic, we need to draw 5 px, 10 PX, and 15 px respectively. Remember to adjust the transparency, and the transparency is also different ~ For the effect, see the figure in step 1.
7. Add a mask and use a black brush to hide the two ends of the line.
8. On the basis of the original line, increase the thickness of the line. The two ends of the line should be fine, as shown in the following figure.
9. Draw another one and try to increase the left of each letter. In this way, we can set the gap between words ~
10. Remember to fade out each line, or else it will not be true ~
11. The result is as follows ~
3. Add colors
1. Now ~ Create a gradient ing adjustment layer for all layers (layer> New Adjustment Layer> gradient ing)
Color: #000000; # 54000c; # d69f0a; # fffee9.
2. Keep the gradient ing at the top of the layer. Now that we have finished creating lines, it's time for us to add special effects, that is, to add highlights!
Repeat the previous path, but this time it is 100-200px, and then simulate the pressure. Use a gray value of 50% (# 8c8c8c ).
Layer blending mode-filter color.
3. Add highlights to all thickened parts of the text ~
4. Now we use white to add more and thicker lines, but we have not simulated the pressure ~ The line is roughly between 25-75px.
5. Soft white lines surround the text to make it look more thick.
4. Add light effects to text
Use the flare image material and place it in ps. Change the light angle to 90 °. Layer blending mode-color filter
2. Copy the light effect, and then change the size, W: 200%, H: 200%, angle: 40 °.
3. The second light effect, filters> blur> Gaussian blur. About 30px.
4. Create two optical nodes and copy them to the positions shown in the following figure.
5. The subsequent text also repeats the preceding steps (steps 3 to 4), as shown in the following figure.
6. Add some lines around the text in the same method.
5. Add a spot
1. Open the "blurry lighte image" material, place it in, and set it as a filter color.
2. Add a mask and wipe it. The effect is shown in the following figure.
6. Enhance the light
Come and come, let's increase the contrast of light to make the effect more cool ~
1. Add a black-and-white gradient ing adjustment layer and set it to a clipboard mask.
Set its layer style to overlay.
2. Copy the spot and place it in different positions in the figure.
3. Copy more ~ Change its size and place it where you want to place it ~ Don't make it too big ~
4. Now we can combine the basic brush. Brush settings-pen tip shape-size 50px-hardness 80%-spacing 150%
5. Open the shape dynamically and scatter 550.
6. Enable transfer and change the settings.
7. Draw more lines around the text with a brush (the place shown in the circle in the figure)
8. Duplicate processing.
7. Add noise
1. Now we add noise without damaging the color and effect.
Select 50% gray (# 8c8c8c), create a layer, and fill in.
Brown, because it is the gradient ing layer below
2. Filter> variegated color> add and enter the maximum value of 400%
3. Blur the image to 0.8 pixels (filter> blur> Gaussian blur ).
4. Change the layer mode-brightness, transparency 5%.
5. Make the final adjustment, layer> New Adjustment Layer> photo filter. Select red. Success! Wow ~
All right, the above information is all the content that is shared by the production tutorials for designing the superb facular text effects for users of this software in photoshop, you can see the software users here. I believe that you have made a very clear tutorial, so all the software users can follow the tutorial to create the superb facular text they want.
