We will give you a detailed analysis of photoshop software and share with you the tutorial on creating liquid metal effects.
Tutorial sharing:
1. Create a 1000*650 Pixel canvas with a resolution of 72 and a black background. Save the following text material,
Use PS to open the saved text material and drag it to the new canvas with a mobile tool. After unlocking, adjust the position. The effect is shown in the figure below.
<Figure 1>
2. Double-click the layer panel. In the thumbnail area of the current text layer, bring up the layer style and set it:
Slope and relief: Select "relief effect" for the style. The other settings are shown in figure 2.
<Figure 2>
Texture: Select the built-in "cloud" pattern for the pattern. If you cannot find the pattern, load it as shown in figure 4.
<Figure 3>
<Figure 4>
3. Confirm the settings and obtain the results shown in the following figure.
<Figure 5>
4. Press Ctrl + J to copy the current text layer to obtain the text copy layer. On the layer panel, right-click the thumbnail blue area of the current layer and choose clear layer style ", see Figure 7.
<Figure 6>
<Figure 7>
5. Set the layer style for the current layer.
Projection: The color is orange red: # ff5500. Other settings are shown in figure 8.
<Figure 8>
Light color: the mixed mode is "light color" and the color is orange: # ffe500. Other settings are shown in Figure 9.
<Figure 9>
Slope and relief: the style "external slope". Other settings are shown in the following figure.
<Figure 10>
6. After confirming, change the filling to: 0%. The effect is shown in the following figure.
<Figure 11>
7. Press Ctrl + J to copy the current layer to the text copy layer 2. Right-click the thumbnail blue area of the current layer on the layer panel and select "clear layer style". The effect is shown in Figure 13.
<Figure 12>
<Figure 13>
8. Set the layer style for the current layer:
Inner shadow: the mixed mode is "linear fade" and the color is yellow brown: # d0a769. Other settings are shown in Figure 14.
<Figure 14>
Light emitting: the light in the mixed mode. The color is # edd9a4. Other settings are shown in the following figure.
<Figure 15>
Slope and relief:
<Figure 16>
Contour lines:
<Figure 17>
Gradient superposition: click gradient to edit gradient. Gradient settings are shown in Figure 19. Other settings are shown in Figure 18.
<Figure 18>
<Figure 19>
Stroke: Select "gradient" for the fill type, and click "gradient" to edit the gradient, as shown in Figure 21. Other settings are shown in Figure 20.
<Figure 20>
<Figure 21>
9. After confirming, change the filling to: 0%. The effect is shown in the following figure.
<Figure 22>
10. Press Ctrl + J to copy the current layer and then clear the layer style, as shown in Figure 24.
<Figure 23>
<Figure 24>
11. Set the layer style for the current layer:
Slope and relief:
<Figure 25>
12. After confirming, change the filling to: 0%. The effect is shown in the following figure.
<Figure 26>
Finally, fine-tune the value of the layer style to complete the final effect.
All right, the above information is all the content that is shared by the compilation tutorial for designing liquid metal effects text for users of photoshop's software, you can see that the software users here are now very clear about the method of making, so everyone should follow the above tutorial to make their desired liquid metal text.
