To give you Photoshop software users to the next gaudy orange effect of the production tutorial.
1, open the original material big picture, press CTRL + J to copy a layer of background layer, select the Fuzzy tool, the next figure selection part of the fuzzy processing.
2, create optional color adjustment layer, yellow, green, green, blue, neutral color adjustment, parameter settings such as Figure 2-6, the effect is shown in Figure 7. This step turns the background main color into tawny.
3, create an optional color adjustment layer, red, yellow, green adjustment, parameter settings such as Figure 8-10, the effect is shown in Figure 11. This step adds orange color to the picture.
4, press CTRL + J to copy the current optional color adjustment layer, the effect of the following figure.
5, the creation of optional color adjustment layer, red, yellow adjustment, parameters and effect of the following figure. This step adds orange color to the picture.
6, create hue/saturation adjustment layer, the yellow adjustment, parameters and effects as shown below. This step turns the yellow in the picture into orange-red.
7, press CTRL + ALT + 2 to bring up the high light selection, press CTRL + Shift + I to select the dark selection, and then create a curve adjustment layer, RGB, red, green, blue channel adjustment, parameter settings such as Figure 18-21, the effect is as Figure 22. This step darkens the dark part of the picture and adds Blue purple.
8, create an optional color adjustment layer, the red, yellow, white, neutral color adjustment, parameter settings such as Figure 23-26, determined to press CTRL + ALT + G to create a clipping mask, the effect is shown in Figure 27. This step is to fine-tune the dark warm color.
9, create a color balance adjustment layer, the shadow, midtones, high light adjustment, parameter settings such as Figure 28-30, determined to create a clipping mask, the effect is shown in Figure 31. This step adds blue to the dark part of the picture.
10, press CTRL + J to copy the current color balance adjustment layer, create a clipping mask after the opacity to: 50%, the effect of the following figure.
11, create curve adjustment layer, the RGB, red, blue channel adjustment, parameter settings such as Figure 33-35, after the creation of a clipping mask, the effect is shown in Figure 36. This step also darkens the dark part and increases the blue color.
12, create a new layer, press the letter key "D" before the background color to restore to the default black and white, and then select the menu: Filter > Render > Cloud, determine the blending mode changed to "Color", the opacity to: 20%. Add a layer mask, with a black and white gradient from the upper right corner to pull the white to black linear gradient, the effect of the following figure. This step increases the brightness of the upper-right corner area.
13, the background layer to copy a layer, press CTRL + Shift +] top, with the pen tool to the characters face and skin part of the pull out, into the selection after adding a layer mask, the effect of the following figure.
14, create curve adjustment layer, the RGB channel adjustment, parameter settings such as Figure 39, determine after the creation of a clipping mask, then the mask filled with black, with a soft white brush to the dark part of the area, such as Figure 40.
15, create a solid color adjustment layer, color set to orange red: #D75C23, to determine the mask filled with black, and then with a lower transparency of the soft white brush to wipe out the upper right corner area, to determine the blending mode to "overlay", the effect of the following figure.
16. Press CTRL + J to copy the current solid color adjustment layer and set the color to orange yellow: #FCD68B, and then change the blending mode to "color filter", and the effect is as follows.
17, press CTRL + J to copy the current solid color adjustment layer, the opacity is changed to: 30%. Then use a less transparent black brush to apply a smaller range of light, the effect of the following figure.
18, create brightness/Contrast adjustment layer, the appropriate increase in contrast, parameter settings such as Figure 44, to determine the mask filled with black, and then use the transparency of the lower edge of the white brush to wipe the upper right corner area, the effect is shown in Figure 45. These steps add orange and yellow light to the upper-right corner of the picture.
19, create curve adjustment layer, the RGB channel down a bit, parameter settings such as Figure 46, after the mask to fill the black, and then use the transparency of the lower white brush to the left, the bottom, the character backlight area painted darker, the effect is as Figure 47.
20. Create a new layer, use the elliptical marquee tool to pull out the selection shown in the following figure, feather 50 pixels and fill with orange: #F29E53, remove the selection and change the blending mode to "color filter", and the effect is as follows.
21, press CTRL + J to copy the current layer, press CTRL + T a little smaller, determine the layer opacity to: 60%, the effect of the following figure. These two steps add a high light to the middle of the picture.
22, CTRL + ALT + 2 up the high light selection, and then create a curve adjustment layer, RGB, red channel adjustment, parameters and effects of the following figure. This step darkens the high light area a little bit.
23, create a new layer, press CTRL + ALT + Shift + E-stamped layer, then select menu: Filter > Blur > Motion blur, Angle set to 45 degrees, distance set to 155, after the blending mode to "soft light", opacity to: 30%, the effect of the following figure. This step of the picture to soften processing.
24, create a solid color adjustment layer, color set to dark blue: #2F3254, to determine the mask filled with black, and then use the transparency of the lower soft edge white brush to slightly darker bottom area, the effect of the following figure.
Finally, strengthen the local light and shade, modify the details, complete the final effect.
Well, the above information is small compiled for you photoshop This software users brought the detailed and gaudy orange-colored effect of the production of the full content of the tutorial, you see the users of Photoshop software here, I believe you are now very clear about the tutorial, Then go to the small part of the tutorial to make it yourself.
