Production Process of mobile phone buttons

General silica gel is generally used for laser engraving, plastic + silica gel, IMD + silica gel, assembling elastic Conductive Film and metal Conductive Film, key surface spraying, you can choose a variety of colors according to the requirements of the artist, according to the Special Assembly needs, cost-effective.

Laser EngravingLight Transmission effect, font light transmission, and increase product value;

Plastic + Silica GelPlastic and silica gel can be combined to achieve soft feel and wear resistance;
This process is currently used ();

FilmLightweight/short, fine-structured, easy to assemble, never worn out, allows 3D design and diverse color and pattern variations, the button can work with a polyester film (or metal) switches and cold films are assembled to reduce assembly time and cost ();

Film + Silica GelSpecial Surface spraying or electroplating process with high quality metal injection keycaps and silicone Assembly products ().

Special Handling

Dual-color injection molding and electroplatingThe cost of a two-color mold is much higher than that of a normal one ().

Based on the p + R method, different processing methods have different effects. You can choose the method as needed during the design process, for example, through splash plating, mirror oil printing, drawing, and other processing methods ().

Splash PlatingAfter the effect, due to the thin coating, to attach UV, enhance the wear resistance ().

SprayingIs a production process, spray paint is spraying. The splash plating layer is thin and transparent. electroplating is divided into water plating and vacuum plating (Water plating is contaminated but the plating layer is not easy to wear, and vacuum plating is widely used but the plating layer is easy to wear ).

Partial rights reservedHillinsilence reserves some rights for this article, and the Copyright and ownership of the rest are reserved by its owner.