QQ Group Interoperability (QQ_BOT) program configuration graphics and text tutorial _ Common Tools

I do not know who the original author of this article, but I went to this Qq_bot official station looked, found a new version, this afternoon just out, support 100 groups, remove the original grouping function. He stands very handsome, qq.im.
Download Address: Http://download.qq.im/QQ_Bot-0.1.0.0.rar

Source: Enchanted Bar Total Blog

What is QQ group interworking

For example, you have joined two QQ groups, group A and group B. The upper limit of these two groups is 100 people, in order to enable the members of these two groups to communicate with each other, then we need a means to connect the two groups, to achieve two groups of information can be shared, mutual exchange.
Configuration steps

Here we have a practical name called Qq_bot QQ Group Interoperability Tools, first of all, thank the original author of the program to provide us with such a convenient gadget, its homepage address is: Http://refile.googlepages.com/qq_bot

The download address for this program is Http://refile.googlepages.com/QQ_Bot.rar

This program is used to bridge the different QQ groups, convenient to chat with each other QQ groups, the program based on Perl module NET::OICQ 1.5

Before use, please configure Qq.ini, you must be your QQ number has joined the group

First download the program to unpack, put the D-packing directory, the structure of the schematic diagram as follows:

D:\
│
└───qq_bot This program root directory
│perl58.dll This program support program
│qq.ini configuration file
│qq_bot.exe Master Run Program
│qq_readme.txt Description Document
│
└───oicq_data Backup Data Directory
Oicq.log Program Run Log

Special NOTE: Because QQ number can only be landed in a place to use, if you use the QQ number you commonly used in this bridge procedure, then you can not normally use your QQ number. So be sure to apply specifically to a QQ number, this just applied QQ number to join you to prepare the bridge in these groups, and then follow the tutorial configuration!

For example, my QQ number is 115637658 I joined the two group numbers are: 28702398 5330027

Then open the configuration file Qq.ini

UserID = Write your own QQ number in the back

For example: UserID = 115637658

If you surf the Internet by setting up a proxy server to access the Internet, then you need to set proxy = This item, if you do not go through the proxy network, then leave the default (left blank)

For example, your proxy server IP is 192.168.0.1 SOCK5 proxy port is: 1080

It is written here as

Proxy = 192.168.0.1:1080

Protocol mode

Protocol = TCP

Leave the default

ConnectMode = Invisible

This is also keeping the default

Write the number of your first QQ group after the grpextid below [Group 1]; in Grpname write you want to give this QQ group definition of name, can and QQ group real name is not the same, the simpler the better, I suggest everyone set to the number 1, the second group of Grpname write 2 Grpintid this value to write a number of 6 to 8 digits, we will revise this value later, this value is the program according to Grpextid (QQ group number) calculation obtained.

Then write the number of your second QQ group after the grpextid below [Group 2]; in Grpname write you want to give this QQ group definition of name, can and QQ group real name is not the same, the simpler the better, I suggest that the first group of this value set to the number 1, The second group of Grpname written as 2;grpintid this value to write a 6 to 8 digits, we will revise this value later, this value is the program according to the Grpextid (QQ group number) calculation obtained.

as follows: (here's two grpintid values are written by hand)

[Group 1]
Grpextid = 28702398
Grpname = 1
Grpintid = 521524512
[Group 2]
Grpextid = 5330027
Grpname = 2
Grpintid = 5585566325

Then the Grpextid (QQ group number) value of the first group is written to the group and saved.
Here is the program to calculate the first Grpextid (QQ group number) of the Grpintid value.

Click "Start" in the lower left corner of the screen--"run"--Input: cmd (carriage return)

And then in the Open Command Line window, enter: CD D:\qq_bot (carriage return)

Re-enter: D: (Enter)

See the following interface


After this prompt shown in the previous illustration, enter: Qq_bot.exe (space) (QQ password)

Like Qq_bot.exe 74110.

And then enter

If the network is busy or you hang (login) QQ too much, will pop up the following dialog box


Then click OK and try again

Get the Grpintid value of the first group until it appears as shown in the following figure


Write the Grpintid value in this prompt box after the Grpintid in the first group ([Group 1]) in the profile Qq.ini (replace this grpintid current value)

Then replace the values after group (the number of the first group) with the number of the second group (the Grpextid value below [Group 2]), and save.

Then execute Qq_bot.exe (space) (password) in the Command line window just now

The Grpintid value of the second group is obtained as shown in the following figure


Write the Grpintid value in this prompt box after the Grpintid in the second group ([Group 2]) in the profile Qq.ini (replace this grpintid current value)

Then delete the value after group (the number of the second group) and leave the value of the group blank

As shown in figure:


Then save the configuration file Qq.ini

Then execute Qq_bot.exe (space) (password) in the Command line window just now

If the network is busy or you hang (login) QQ too much, will pop up the following dialog box


Then click OK and try again

Until there is no hint of the time, this time you can use the other one also joined the two QQ group QQ to send a message test, if you send a message in 1 groups, and you receive it in the 2 group, and you send a message in 2 groups, and 1 groups receive it, then you are configured to succeed. This time you can close the command line window.

Special Tips

The program author said that can support four group interoperability, but after the actual test can only two interoperability, so please configure Qq.ini when the file in the bottom of the

[Group 3]
Grpextid = 7454195
Grpname = PerlChina3
Grpintid = 209454195
[Group 4]
Grpextid = 386891
Grpname = Perl Exchange 1
Grpintid = 202386891

deleted.

Offline version tutorial (pdf format) Download address: Click to download

The author may refine this issue in the next release and add more features, please follow the author's homepage Http://refile.googlepages.com/qq_bot

Add a: A lot of netizens see this thing too mysterious, can not understand the principle of normal. A simple word is through the program control a QQ, to enable him to implement according to set to relay group information ~!

The latest version of the program download address: http://chm.ideacm.com.cn/qq_bot/d