Real broadband Internet acceleration Methods

The real bandwidth acceleration method !!!!!!!!!!! (Revised version)
My own bandwidth is:
The ideal download speed of 3 mb adsl/cable modem is 375 (KB/sec)

After the attack, I arrived
Http://www.pc286.com/other/speed.asp;
The test value is 4080 kbps. Download 500 KB/second.

How many software I have used to speed up the network, but it's useless. It's not as fast as installing the software as it's mentioned.
Until I find this website http://www.speedguide.net/; you don't have to install any software programs on your computer
I also use this website to modify the registry of the Microsoft Windows operating system, or modify MTU to achieve optimal settings.
The success rate reaches 100% in China, regardless of the use and two-way (rate 6 MB/256kb) cable Internet/
Dongsen two-way cable Internet or any ADSL (with a rate of 1.5 MB), and significantly increase the online speed
However, I recommend a two-way cable modem (non-Yangchun) broadband network. It is best to download a broadband network that can exceed 1 MB.
If you use ADSL to download less than 1 MB or two-way cable modem Yang Chun (KB/64 KB) or practical, (KB/kb) is useless
Because I believe that most of you currently use ADSL to download at a speed of less than 1 MB, either 786 kbps or kbps, in fact, the maximum download value of the registry and MTU of Microsoft Windows operating system is 1 MB, for example (98, me) (Windows XP sometimes optimizes your network speed)
In my actual example, Windows 98 has the largest space for me acceleration, however, your ISP provides you with a download speed of less than 1 MB, and you don't have to optimize it. Just like after your optimization, the computer's set value becomes your computer and the online speed is 5000 kbps.
Your ISP can download up to 786 kbps or kbps.
Your online speed can only be 786 kbps or kbps
I want to good solemnly strong and we recommend a http://www.speedguide.net /;
This website is a famous website in the United States that changes the Microsoft Windows operating system's Registry and MTU to achieve various speed optimizations.
The teaching practice is as follows:
First, your computer must have a compression software version later than winzip8.0.
Connect to http://www.speedguide.net /;
Step 1: Applicable to Windows 98, Windows ME, Windows 2000, and Windows XP
-- Broadband option -- downloads/patches -- click Next:
Note !!! The following files are very small"
Files required for Windows 98:
Mtupatch98.zip
Sguide_tweak_98_me
Download here: http://www.speedguide.net/files/sguide_tweak_9x.zip;
Sguide_tweak_98_me_pppoe
Download here: http://www.speedguide.net/files/sguide_tweak_9x_pppoe.zip;
Sg_webtweak_9x.zip
Download here: http://www.speedguide.net/files/sg_webtweak_9x.zip;
Files required for Windows Me:
Sguide_tweak_98_me
Download here: http://www.speedguide.net/files/sguide_tweak_9x.zip;
Sguide_tweak_98_me_pppoe
Download here: http://www.speedguide.net/files/sguide_tweak_9x_pppoe.zip;
Sg_webtweak_9x.zip
Download here: http://www.speedguide.net/files/sg_webtweak_9x.zip;
Files required for Windows 2000/XP:
Sguide_tweak_2k.zip
Download here: http://www.speedguide.net/files/sguide_tweak_2k.zip;
Sguide_tweak_2k_pppoe.zip
Download here: http://www.speedguide.net/files/sguide_tweak_2k_pppoe.zip;
Sg_webtweak_2k.zip
Download here: http://www.speedguide.net/files/sg_webtweak_2k.zip;
After the preceding program is decompressed
If the extension is. Reg, click it with the left mouse button.
If the extension is. inf, right-click it and a drop-down window will appear. If you select "Install" in WinZip, select "Install" in WinZip !! After decompression, you can find files with the extension. Reg and. INF.
Remember to execute files with the extension of. Reg. Do not install files with the extension of. inf or other files.
Step 2: Windows 98, Windows ME, Windows 2000, and Windows XP
Go to the http://www.speedguide.net/; Home Page
See the shortcuts column on the left-TCP/IP analyzer to analyze some of your network settings.
Check your default receive window (rwin) = 256960,
Has it reached 256960?
If no, click TCP/IP optimizer in TCP/IP analyzer on the left to enter the new page.
Download the first modifier TCP optimizer above and execute it
Download here: http://www.speedguide.net/files/TCPOptimizer.exe;
After the command is executed, a window is displayed, showing which type of Internet access is used to check your Internet access method. Select your broadband access method and tick modify all network adapters in the middle of the window.
Under the window, check optimal settings and finally Press Apply changes.
Restart the instance and then press TCP/IP analyzer to test it.
The default receive window (rwin) = 256960 value will be 256960 (or close ).
(If it is not 256960, this usually occurs in Windows 98. It should be less than one program.
Therefore, if your operating system is Windows 98, download the MS vtcp.386 fix for Windows 98 program in the middle of the same page in step 1, decompress the program, and restart the system)
Step 3 only applies to Windows XP
The Chinese version is as follows:
Select Start and run, and type gpedit. MSC"
Computer Principle on the local machine-Computer Configuration-management template-Network-QoS packet scheduler-limits the reserved bandwidth-click "attribute" on the left to check "enabled"
Bandwidth limit (%): 20 to 0 "OK" and then reboot
The English version is as follows:
"START" click "run" enter "gpedit. MSC"
Local Computer Policy --- computer
Configuration-Administrative Templates
--- Network --- QoS packet scheduler --- limit reservable
Bandwidth --- setting
Make sure check box on "enabled" is selected
Bandwidth limit (%)
"Apply" "OK" then restart computer
You only need to follow these three steps to determine your network connection speed, but I reiterate that this is suitable for broadband network optimization, sorry, there is no difference.
If the download speed provided by your ISP does not exceed 1 MB, it is basically not changed, so don't expect too much. However, you can try it out. Note: I am not a hacker, but I also succeeded.
So please step by step. If something really goes wrong, please try again. Areas are powerless. Do not be too self-satisfied after success, because most websites have speed restrictions. Only when they connect to truly excellent links can the speed exceed 4 MB per second be truly reflected .....

Intranet BT acceleration ADSL (with routing) + hub port ing
If your LAN connection is in the form of ADSL (with routing) + hub, then the gateway must be in the ADSL-MODEM (with routing, whether you are a single user or a shared Internet user (a single user does not need a hub), you can only be an intranet client user and want to allow users outside the network to access the computer of your intranet IP address, you must configure NAT (Network Address Translation) on ADSL to implement port ing.
I do not know what type of ADSL is. To set Nat, you must find the Setting Description. You can find the manufacturer's website based on your ADSL instruction manual. The above must have instructions on Nat settings on ADSL (the NAT setting procedures vary between different manufacturers ), follow these steps to complete port ing.
Note: The Nat settings can be fully performed on clients in the LAN, rather than on the gateway! This is important! Haha!
The following is the description of NAT settings for real-time ADSL modem (1.x 2.x). the settings for other ADSL Modem are similar.
(1) setup process
Modem Network port IP Address: 192.168.10.1 (factory default, can be changed)
Assume that the VM address is 192.168.10.105 (the IP address can be any IP address of the VM to be created in the LAN)
① Enter the doscommand line, enter Telnet 192.168.10.1, and press enter, prompting you to enter the password and enter the corresponding password (user name and password, which can be posted on the Forum of the ADSL manufacturer website ).
2. Set the port. The command for setting the port is:
Nat inbound add [I/F] [port]/[Protocol] 192.168.10.105
[I/F] indicates the interface name, And rfc1483 + NAT indicates the bridge
Rfc1483router interface: rfc1483
Rfc1577 interface is IPOA
The rfc2364 interface is ppp_device.
The rfc2516 interface is ppp_device.
[Port] is the port to be mapped. Port 80 is commonly used for HTTP, port 21 is commonly used for FTP, and port 1503 and port 1720 is used for netmeeting.
[Protocol] Protocol, generally TCP and UDP. The above mentioned ports are all TCP. Note that this parameter should be in lower case.
If you need to set multiple port ing, use this command multiple times.
For Bt, enter the following command for port ing:
Nat inbound add ppp_device 6881/tcp 192.168.10.105 press ENTER
To
Nat inbound add ppp_device 6889/tcp 192.168.10.105 press ENTER

③ Enter the command config save to save the settings, so that the NAT port ing settings are completed.
(2) other related commands
① Nat inbound List displays the NAT settings of the device
② Nat inbound Delete # Delete the corresponding Nat settings, # It is the rule serial number
③ Nat interfaces: displays Device Interface Information

After the current port ing, do you use BT to increase the speed?

This is the BT download tool btogether that can be used as a proxy (wild download)

Btogether is a new P2P download software based on BitTorrent (BT.
The downloading feature is that the larger the number of downloads at the same time, the faster the download speed.
The latest version of btogether can also be downloaded through common proxy servers.
This software is pure Chinese Green Free Software, no additional Runtime Library.