Refresh the new vro firmware to enable dual-line Internet access

To enable the dual-line Internet access function. After you have downloaded the new firmware version of The vro, we will be able to go to today's courses through corresponding settings. Please try it to make your network speed faster.

A few mouse clicks to refresh the firmware.

Before starting to update the firmware of the new vro version, you must check the http://www.dualwan.cn/start?文. Note that some of the remarks are still worth noting. Some routers may fl into bricks if they do not pay attention to them. Only three methods can be used to decompress a brick or use a TFTP brush or a jtag wire for restoration.

In most cases, the method for refreshing the new firmware version of the tomato router is the same as that for upgrading the firmware. The operation is not complicated. Next we will introduce the most common refresh method.

◆ Go to the official website and the official website of Tomato http://www.polarcloud.com/tomatoto confirm that your website is in the support scope. And check whether special refresh methods such as the TFTP refresh method are required. If the vro supports Tomato and has no special precautions, go to the next step.

◆ Download the new firmware version of the Tomato Dual Wan Mod router to confirm whether the MD5 value matches the Value published on the release page. However, if a compressed file package is downloaded and the file can be decompressed properly, the files that are extracted are normal. If a CRC error is reported during the decompression process, but the decompression can still be performed, we recommend that you download a new copy to avoid the router being flushed into a brick.

◆ Log on to the vro from the browser, go to the management interface, select "upgrade firmware", select the new firmware version of the downloaded vro, and click "Upgrade ". If there is no file for a specific model for a vro, choose Tomato. trx or the Tomato-ND.trx to refresh Fig 1); The Tomato-ND.trx is for the ND device, such as the BCM5354 chip router. Next, wait for the operation to be completed automatically. Do not shut down your browser or restart or shut down your vro during the refresh process. Of course, pray that you do not have a power outage. Otherwise, the vro will become a brick. Refresh a router can be refreshed through a wireless or wired network connection, but we recommend that you use a wired network refresh for the sake of insurance.

Figure 1 refresh a vro

After the router is restarted, the router is refreshed. Then, configure the settings in the browser.

New vro firmware settings enable dual-line Internet access

We strongly recommend that you take a closer look at the detail. Because the Linux system has a high degree of freedom and some scripts are complicated, reading help and documentation can help you solve many problems, for example, set the proportion of the two networks, solve the problem that the bandwidth cannot be merged, and optimize the memory.

After the refresh is complete, the LAN port next to the WAN port is automatically set to the WAN2 port by default. If you connect to the WAN port through a network cable, avoid this port; otherwise, you cannot set it smoothly. In addition, some routers are strange, and WAN2 is not necessarily the LAN port next to the WAN port. When the connection fails, try several more interfaces. Figure 2 ).

Figure 2 one LAN port has been converted into a WAN Port

Access 192.168.1.1 in a browser and enter the user name and password. User name: root, password: admin. If the password is incorrect, you can also enter the password you set earlier. The new firmware version of tomato router may use the password you set earlier. Some tomato mod are strange. The default account and password are different, but they are generally a combination of root and admin. For example, the username and password are both admin and root, or the user name is the root password admin or the other way around. If you encounter such problems, try again.

It is possible that the IP address is not 192.168.1.1 or 192.168.2.1. At this time, you need to manually change the IP address of the computer's wired/wireless connection to 192.168.2. *, and the default gateway is 192.168.2.1. Enter 192.168.2.1 in the browser and press Enter. And even if the IP address is still 192.168.1.1, if you cannot access the vro, you also need to manually set the local IP address and default gateway, the IP address is 192.168.1. *, and the default gateway is 192.168.1.1. Click basic Settings> network settings. here we can see an additional WAN2 option, just like WAN1. For example, for PPPOE connected to ADSL, enter the user name and password as shown in figure 3 ).

Figure 3 configure the multiple WAN2 ports

It's almost the same here. However, this is not all about DualWAN. The more powerful function is its script.