Set up a Windows 7 virtual wireless router

Now almost all laptops have wireless cards, and since this year has liberalized the mobile phone Wi-Fi restrictions, which means that later there will be more mobile phone with Wi-Fi features. If you have a laptop, and a phone that supports Wi-Fi, but use a wired network. Then you can not buy a wireless router, you can also achieve the Internet, the principle is to use the Win7 virtual Wi-Fi network features, so that their notebook into a wireless router, to achieve other support Wi-Fi equipment or laptop wireless Internet access.

Windows 7 Virtual wireless Router Setup step:

1 To run the command prompt as an administrator because the following steps are required to run under administrator privileges, we find a command prompt from the Start menu, or type cmd quick Search, Hold down the CTRL and SHIFT keys to click the shortcut directly, so that the program has administrator privileges.

2. Enable and set virtual WiFi network card mode to run the following command to enable the virtual wireless network card (equivalent to turning on the router):

Netsh wlan set win7wifi mode=allow ssid= "wuxianle.com "Key=wuxianle

has three parameters in this command:

Mode:allow means that the virtual WiFi card is enabled, and disallow is disabled, the virtual NIC disappears.

Ssid: The name of the wireless network, recommended for use in English.

Key: The password for the wireless network. The password is used for secure WPA2 encryption of the wireless network, which can prevent the net from being rubbed well.

The above three parameters can actually be used alone, such as using only Mode=disallow to disable the virtual WiFi card directly.

3. Enable Internet Connection Sharing (ICS) to share the connected Internet with other notebooks or Wi-Fi devices, you need to enable the Internet Connection Sharing feature.

to open the Network Connections window for your notebook, right-click a network connection that is connected to the Internet (your notebook is on a network connection to the wired Internet), select Properties, switch to the Sharing tab, and select Allow other network users to connect through this computer's Internet connection. Select the name of the network connection you are using in your home network connection. After

is determined, a shared flag appears next to the shared network card icon, indicating a successful setting.

4. Turn on virtual Wi-Fi network continue at command promptRun the following command:

Netsh wlan start win7wifi

so that we can start the virtual Wi-Fi network (WIN7WIFI) We just set up, change the command to stop, and deactivate the network.

This is where other laptops or Wi-Fi phones can be used for wireless internet access. However, this method requires a notebook to open, other devices can be networked, all this low-cost configuration, but if you often use mobile phone online advice or buy a wireless router, so it is more convenient to use.