Share host internet connection on the wince6.0 Simulator

With the release of wince6.0 R2, there are more and more blog posts and technical materials on WinCE, which is quite a pleasure, especially after the various failures of wince5.0 or wince6.0 simulator connection. Thanks to fans and volunteers for releasing the wince6.0 or wince5.0 sdks that they compiled successfully. After I reinstalled the system, at least I started my wince teaching with the sdks they released.

This article focuses on how to share the Internet connection of the host in the wince6.0 simulator. Because we need to use a proxy server in the lab of Zhejiang University, if the reader's network environment is different, you should also set up your own Internet access environment. The setup steps are listed below. For details, see: 1. software environment. mircosoft activesync4.5b. device emulator Manager (Chinese Version of manager2.0), the English version should also be OK C. chsint SDK for wince 6.0)
2. Open the device simulator Manager (. NET 2005-> tool-> device emulator manager or directly in its installation directory c:/program files/Microsoft device emulator/1.0), as shown in 1.

 

 

3. Set the device emulator configuration, select File> Configuration> network tab, cancel "host network only", and select "enable ne2000 ......", Select the NIC that is more in use on your host.

 

4. Set the IP address, gateway, and dns in the wince started by the simulator. 5. Set the IE option in the wince started by the simulator and configure the proxy server.