Six windows 1.1.1cracking tutorials

Note:
1. OTB = out of box, that is, the iPhone whose firmware version is 1.1.1 (PS: servers of version 1.0.2 and earlier that have not experienced any cracking behavior can also be upgraded to version 1.1.1
Use)
2. This activation method is only applicable to the OTB 1.1.1 iPhone when baseband is not modified.
3. the SSH user name is root and the password is Alpine.
4. The red text indicates that you use the "winscp" software, and the blue text indicates that you use "putty"
5. Only text in "" can be entered for all text prompted for input.

Version 1.1.1 unlock Kit

(Including winscp, touchfree, putty, anySIM-1.1, iasign, lockdownds, etc)

Part 1 first, we need to get safari into use:
01. Slide the "emergencydialscreen" on the interface to enter the emergency dialing screen;
02. Enter "* #307 #" in the emergency dialing screen and press "call;
03. Your iPhone will automatically ring and press "Answer;
04. Press "hold". Now your iPhone will automatically ring again;
05. Press the "Dismiss" key and your iPhone will be able to access the contacts/dial interface.
06. Press the "contacts" key to slide from the bottom up and add Contacts (any name can be like payea, a random URL in the homepage, such
Http://iphone.tgbus.com)
07. "save" to save the contact you entered, and then click the contact URL. Safari will automatically start and display "cannot load the site...". Press "OK;
08. Now it is a very important step. Now press the "home" button in the lower part of the machine display screen to enable the iPhone to quickly select you and build a Wi-Fi network, and press and hold the machine display
The "home" button in the lower part of the screen appears until a small box is displayed on the screen, prompting you to select an open network. You will see a wireless Internet access signal displayed on your iPhone;
08.1 shut down your iPhone and restart it one or two minutes later. (You do not simply press "hold" to go to the standby mode, but completely shut down and restart it)
08.2 after the iPhone is restarted, the WiFi icon should be displayed on the top of the screen. If not, repeat steps 1-8. (This is normal, it took me five times to get wireless access.
Network)
09. Confirm WiFi work;
09.1 slide the "emergencydialscreen" on the interface to enter the emergency dialing screen;
09.2 enter "* #307 #" in the emergency dialing screen and press "call;
09.3 your iPhone will automatically ring and press "Answer;
09.4 press the "hold" key, and now your iPhone will automatically ring again;
09.5 press the "Dismiss" key and your iPhone will be able to access the contacts/dial interface.
09.6 press the "contacts" key to slide from the bottom up and add a contact, whatever the name is, but this time the address of the put homepage is "http://jailbreak.toc2rta.com /"
10. Press "save" to save the contact you entered, and then click to enter the URL of the 2nd contact. Safari will load the page and automatically close the page. Then, it will reply to the desktop, and the screen will be displayed, excited.
IPhone;
Another recommended method is as follows:
01. Slide the "emergencydialscreen" on the interface to enter the emergency dialing screen;
02. Enter "* #307 #" in the emergency dialing screen and press "call;
03. Your iPhone will automatically ring and press "Answer;
04. Press "hold". Now your iPhone will automatically ring again;
05. Press the "Dismiss" key and your iPhone will be able to access the contacts/dial interface.
06. Press the "contacts" key to slide down and add a contact
07. Add a contact and enter the name payea and homepage "prefs: // 1f"
08. "save" to save the contact you entered and click the contact URL. This will take you directly to the iPhone settings menu, you choose a WiFi network;
09. Confirm WiFi work;
09.1 slide the "emergencydialscreen" on the interface to enter the emergency dialing screen;
09.2 enter "* #307 #" in the emergency dialing screen and press "call;
09.3 your iPhone will automatically ring and press "Answer;
09.4 press the "hold" key, and now your iPhone will automatically ring again;
09.5 press the "Dismiss" key and your iPhone will be able to access the contacts/dial interface.
09.6 press the "contacts" key to slide from the bottom up and add a contact, whatever the name is, but this time the address of the put homepage is "http://jailbreak.toc2rta.com /"
10. Press "save" to save the contact you entered, and then click to enter the URL of the 2nd contact. Safari will load the page and automatically close the page. Then, it will reply to the desktop. The screen is displayed and activated.
IPhone;

Part 2:
01. Download a touchfree software (which can run in iPhone) is: http://www.slovix.com/touchfree/touchfree-setup.exe (installation run
If you have installed. NET Framework 2.0 or 3.0)
02. Run touchfree.exe.
02.1 when you are prompted to restart ("Please reboot your iPhone now."), close the iPhone as usual (keep holding down the sleep key above, slide and shut down), and then turn it on. IPhone Main Course
After the ticket appears, press enter to continue.
02.2 when you are prompted to restart the iPhone twice ("Please reboot your iPhone now twice."), disable the iPhone, enable it, disable it, And then enable it. After the main menu appears, press enter to continue.
02.3 enter the IP address ("Enter the IP Address:") of the iPhone, press settings on the iPhone, press Wi-Fi, and press the small blue arrow next to the wireless network you are currently accessing, here you can
To find the IP address.
03. After touchfree is run, you must restart the iPhone to enter the original itouch-like interface (Springboard is the springboard, but I don't know how to translate it)
04. set to automatically lock your phone to "never" (on iPhone: Settings> General> auto-lock> never)
05. Now download winscp is: http://winscp.net/download/winscp404setup.exe
06. Find the automatically assigned IP address of the iPhone from the wireless router. The search procedure is Settings> Wi-Fi> "your selected WiFi" (your wifi name)> look under
IP address
07. Use winscp to connect to your iPhone (enter "root" for the user name and "Alpine" for the password ")
Figure 1 after you press login, The winscp on your screen is like this.

01 winscp login.png (26.65 KB)

08. Download and decompress anysim 1.1.1
09. Use winscp to upload anysim 1.1.1 to the/Applications folder (chmodded to modify and ensure that all files in the anysim. app and anysim folders belong
0755)
Application folder address 2

02meida.png (14.74 KB)

Make sure that the anysim. app directory and the file name are chmodded to 0755 attributes in the "anysim" directory.
10. Download and unzip this file is: http://rapidshare.com/files/63229501/killall.html
11. Upload the extracted files to the/usr/bin directory of your iPhone.
12. Change the permission to 0655. If the permission fails, you can try to change it to 0755.
13. Run the installer on the original itouch-like interface (springboard stands for springboard, but I don't know how to translate it;
14. Select and install BSD subsystem in installer to restart the iPhone;
15. Restart the iPhone and run anysim 1.1.1. (make sure you have inserted a new SIM card. It is not the ATT card of the original machine. Otherwise, the attack will fail)
16. Restart the iPhone after running anysim 1.1.1;
17. Download and unzip this file, is: http://rapidshare.com/files/63231299/lockdownds.zip.html
18. Upload the extracted three files to the/usr/libexec directory of your iPhone.
19. Set the permissions for the three files to 0755.
20. Rename the lockdownd file in your iPhone/usr/libexec folder to lockdownd. Back.
21. Download iasign, yes: http://dl.free.fr/dzt8908bh/iasign_win32.zip
Please download what is needed when running iasign in http://rapidshare.com/files/63351413/iasign-dlls.zip.html

Part 3 final battle
01. in the/iasign/bin/folder of the ZIP file you just downloaded, there is an iPhone activation. PEM file, upload it to your iPhone/system/library/lockdown folder;
02. Download putty software, is http://the.earth.li /~ Sgtatham/Putty/latest/x86/putty.exe
03. Use Putty to connect your iPhone (User: Root Password: Alpine)
04. Run the following command in Putty: killall lockdownd
05. decompress the iasign file and download it to the root directory of your C drive;
06. Start cmd on your computer (menu> RUN> cmd)
07. Enter the iasign folder under the C-drive root directory as instructed by the command line in Figure 3.

08. Run this command: iasign -- Automatic iphoneactivation_private.pem
09. Your iPhone will pop up a message telling activated (activated)
10. Use winscp to rename lockdownd to lockdownd.1.0.2 (file in/usr/libexec)
11. Use winscp to rename lockdownd. Swap to lockdown (file in/usr/libexec)
12. Run the quoted command "killall lockdownd" on putty"
13. Restart your iPhone

Author information: the Chinese text in this article is prepared by: payea (part of the translated text is from weiphone crazymummy)

Article from http://iphone.tgbus.com copyright owned by original author