Soft route overlay bandwidth Windows + virtual machine, wired wireless network card

Today's computers are getting faster and faster, and dual-core, three-core, and quad-core computers are already common. Now there is a lot of memory, 2 GB/4 GB is normal, but the network is still very slow!
2 Mbit/s/4 Mbit/s. What balance do you have in your mind when the computer is so slow? If your community can find multiple wireless networks, then...
Today, we will teach you how to turn your computer into a wireless router using virtual machine technology, and use multiple wireless network cards to merge bandwidth. The speed at which your ADSL is converted into optical fiber !!

XP + wired network card + wireless network card overlay bandwidth

Only one computer running XP is used, and a wired network card and a wireless network card are added to the computer itself. [Wired and wireless two NICs are provided in this book]
There is only one other cat.
This solution is: XP running virtual machine uses sea spider to overlay the bandwidth
Strive to minimize hardware and software requirements:
Here, we only need two physical NICs. in windows, we can run software to achieve dual-line bandwidth overlay. Moreover, based on virtual machines, computers can still do things normally in windows systems, not like some solutions dedicated to exclusively using a computer for routing.

I am also a newbie to soft routing. I also need to learn more from you. If there are any errors in this article, I hope to correct them.
Here, we mainly use soft routes to overlay the bandwidth. Soft routes also have many other functions. It is not mentioned here. If you are interested, you can continue to discuss it.

Line A: China Telecom 2 Mbps ADSL maximum speed 256KB/s
Line B: China Telecom 4 Mbps ADSL maximum speed kb/s
Maximum bandwidth for dual-line superposition: 256 + 512 = 768KB/s
View the overlay
Instantaneous Speed and 5-minute real-time speed curve:
= 700) window. open (/Article/UploadFiles/201006/2010060519413055 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">
Final score:
Hsrouter2009_Build0807 Advanced Policy Routing
= 700) window. open (/Article/UploadFiles/201006/2010060519413082 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">
Hsrouter_vip_v4.1.8 packet-based load balancing policy
= 700) window. open (/Article/UploadFiles/201006/2010060519413006 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">

Related Software:
Hsrouter2009_Build0807.iso
: Ftp: // FTP_hsrouter: 123456@sftp.host-diy.com/2009/hsrouter2009_Build0807.iso
Hsrouter_vip_v4.1.8.iso
: Ftp: // FTP_hsrouter: 123456@sftp.host-diy.com/nonfree/hsrouter_vip_v4.1.8.iso
VMware Workstation Virtual Machine V6.0.2 build591_chinese version .exe
: Http: // 58.83.127.243: 9203/3 a4912a4f6bc76acc4c9acb48320f60667153169/49.duote.com.cn/ha_vmware.exe
Note * use thunder to download

Appendix:
Another advantage of using windows + virtual machines is that you can easily add more physical NICs and overlay more line bandwidth. Wireless Network Card does not need to be said, such as the sagim 760N such good performance of the USB network card is only about 30 yuan. Wired Nic, PCI or PCI-E and so on NIC due to limited number of slots, plug a lot. If you use multiple network interfaces, the price is much higher. What should I do? We can use a USB Nic. the USB Mbit/s Nic is only about 20 RMB. In combination with USB HUB or Card Bus to USB Card, we can expand many USB ports, which can be easily increased. Then, use the virtual machine to bridge the network card to the virtual network card.
For Learning tests only. Do not use it for adverse purposes.


~~~~~~~
In the past, China Telecom and China Netcom wanted to implement the two ADSL Services. At that time, there was no result. Now we have changed the optical fiber ......
Thank you for sharing your thoughts.
~~~~~~~
Detailed setting process:

It seems a lot of complicated. In fact, it's easy to get started.
I just try to write more details to make it look long. In practice, it takes only a few minutes to overwrite the download speed from installation to implementation.

Preparations
Go to the website of the sea spider to learn how to install and use the sea spider on a virtual machine.
The text description of the FAQ on the official website has been very detailed. Therefore, the same part will not be described in the detailed steps below.
Http://www.hi-spider.com/docs/single.html#run_hsrouter_in_vmware

1. download the software first:
Sea spider soft route: hsrouter_isp_v6.1.0.iso size: 41.5 MB
: Ftp: /ftp_hsrouter: 123456@sftp.host-diy.com/nonfree/hsrouter_isp_v6.1.0.iso
Virtual Machine: VMware Workstation Virtual Machine V6.0.2 build591_chinese version .exe size: 309 MB
: Http: // 58.83.127.243: 9203/3 a4912a4f6bc76acc4c9acb48320f60667153169/49.duote.com.cn/ha_vmware.exe
Note * use thunder for downloading. for virtual machines, use V6.0 or a later version. In V5, the virtual hard disk is not recognized when sea spider is installed. In addition, errors may occur in the green version of VMware. For example, if you add a virtual Nic for the 20 mb Green Alliance version recommended by the sea spider FAQ, an error is reported.
= 700) window. open (/Article/UploadFiles/201006/2010060519413014 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">

2. Install the VM:
The above provides the complete 309MB version of the virtual machine test is in good condition, pay attention to the prompt when installing.
Note the sequence code of VMware Workstation. It is automatically added to the clipboard during installation, so paste it directly.
= 700) window. open (/Article/UploadFiles/201006/2010060519413044 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">


After the installation, the computer -- control panel -- Network connection can be seen, two more virtual NICs, VMware Network Adapter VMnet1 and VMnet8
= 700) window. open (/Article/UploadFiles/201006/2010060519413013 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">
Check the connection status of each Nic. I have a gigabit wired network card connected to 2 Mbps Telecom ADSL, and a 300 Mbps wireless network card connected to 4 Mbps Telecom ADSL.

3. Virtual Machine Settings -- bind a physical NIC:
Open the VMware Workstation Virtual Machine and edit -- virtual network settings
= 700) window. open (/Article/UploadFiles/201006/2010060519413098 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">
I will bind a gigabit wired network card to VMnet0 and a 300 mb wireless network card to vmnet2. Remember that the binding is complete and click confirm to take effect.
To bind more external networks, you only need to bind more physical NICs here.
= 700) window. open (/Article/UploadFiles/201006/2010060519413014 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">

4. Virtual Machine Settings-create and edit a virtual machine:
The FAQ text on the official website of the sea spider has been detailed. Here are some differences.
The FAQ on the official website is based on two physical NICs, one as the LAN and the other as the WAN.
Because I have dual-line overlapping, the dual-WAN requires two physical NICs,
I am a bit lazy here. I just used the VMnet1 that I just brought to the virtual machine. This saves one physical Nic and only needs two physical NICs.
The settings of the three virtual NICs correspond to the following three figures:
= 700) window. open (/Article/UploadFiles/201006/2010060519413144 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">
= 700) window. open (/Article/UploadFiles/201006/2010060519413133 .jpg); "onxxxx =" if (this. offline setwidth> 700) this. width = 700; if (this. offline setheight> 700) this. height = 700; ">

Edit the optical drive and select the hsrouter_isp_v6.1.0.iso downloaded above to start the drive. Why choose the ISP version? Let's take a look at this: http://www.hi-spider.com/html/verdiff.htm;
Delete irrelevant sound cards, USB, and so on.
Then start the virtual machine, install and run the sea spider according to the FAQ on the official website. Here, the management IP address on the LAN interface is set to 192.168.2.1.

5. Set VMnet1
Step 4: The sea spider running in the virtual machine has been running. However, the WEB configuration page of the sea spider cannot be accessed for the time being, because the network segment 192.168.2. * cannot be accessed for the time being.
Don't worry, because we have reserved a virtual network card VMnet1, which is used to solve this problem.
Computer-control panel-network connection, manual setting of a fixed IP address should be okay.
I have set the IP address to 192.168.2.1 and the subnet mask to 255.255.255.0. Remember to confirm.