Solution for failure to access the Internet due to network configuration in Win7/Win8

Solution for failure to access the Internet due to network configuration in Win7/Win8
I believe that when you use a Windows 7 or Win8 OS computer to access the Internet, you may encounter a small exclamation point on the Network icon in the lower right corner of the computer, we usually go back to check whether there is a problem with our own vro, check whether the above light is on normally, and finally restart the vro, but the result is still not going to the network, at this time, some people may wonder if something is wrong with their computer?
Www.2cto.com is not the case. Sometimes the computer is very naughty. You only need to set the network configuration of the computer and then you can easily access the internet. The following describes how to quickly solve this problem and make you a computer engineer.
1. Right-click the small Network icon in the lower right corner of the desktop. 2. Click Open Network and sharing center. You can change the adapter settings in the upper-right corner to see your network connection status.
Www.2cto.com 3. click Modify adapter settings. The network connection including your wifi is displayed.
4. Here we can see the Ethernet network connection. This is a mark that you can access the Internet after inserting the network cable. If it is the same, it indicates that you have disconnected. How can this problem be solved. 5. How to reset the network connection. Right-click Ethernet, and click Disable. When the icon is gray, right-click, enable, and return to the desktop. The network is reconfigured, which easily solves the difficulty of network access.
In this way, you can re-enable it. In this way, you can access the Internet. This method is applicable not only to network connections, but also to wireless connections. The steps are the same as described above.