The Windows 2012 operating system is reported under 36888/36887.
A critical warning was generated and sent to the remote endpoint. This causes the connection to terminate. The critical error code defined by the TLS protocol is 10. The Windows SChannel Error state is 1203.
A critical warning was received from the remote endpoint. The critical warning code defined by the TLS protocol is 48.
In fact, Schannel event entry is divided into 4 levels:
Logging Options
the default value for Schannel event logging Is 0x0000 in Windows NT Server 4.0, which means that no Schannel events is logged. In Windows $ Server and Windows XP Professional, this value is set To 0x000 1 , which means that error messages is logged. Additionally, you can log multiple events by specifying the hexadecimal value of equates to the logging options Want. For example, to log error messages (0x0001) and warnings (0x0002), set the value To0x0003 .
Value |
Description |
0x0000 |
Do not log |
0x0001 |
Log error Messages |
0x0002 |
Log warnings |
0x0004 |
Log Informational and Success events |
Reference Links:
how to enable Schannel event logging in IIS
http://support.microsoft.com/kb/260729
You can check the eventlogging under hklm\system\currentcontrolset\control\securityproviders\schannel , the default should be 1, We can set it to not log any error events by following the steps below.
Navigate to Hklm\system\currentcontrolset\control\securityproviders\schannel
Change the value of the eventlogging under Schannel to 0. Then restart the computer for the changes to take effect. We should not have seen the error after the restart.
This article is from the "Sincano" blog, make sure to keep this source http://sincano.blog.51cto.com/12303450/1897792
The critical error code defined by the TLS protocol is 10. Windows SChannel Error status is 1203