Thefilm faced plywoodAnd the Wood I beam is both the important part of the International building formwork system. They both has the same characteristic of light weight, high strength, good linearity, isn't easy to be deformed, water and Acid-alkali resistant etc. Both of them can be reused annual and the cost are low. As well, they can is used together in the inner and outer professional formwork system. Thefilm faced plywoodAnd the Wood I beam can be widely used toghether in the horizontal formwork system, vertical formwork system that Includi ng The wall foming, pillar forming and hydrolic climbing formwork etc. Variable arc formwork system and the profiled FORMW ORK panel System. The difference between thefilm faced plywoodAnd wood I beam is as belows:the wood I beam slab formwork system was the loading and unloading formwork panel, which is E Asy to is assembled to variable sized formwork system. It's convenient to jointed the customized length and height, can be higher than. Because the weight of the wood material, the whole panel jointed is lighter than the steel formwork panel. So the wood I beam are the bearing beam for the temporary forming system. But thefilm faced plywoodis mainly directly used as the forming panel to form the surface of the concrete of building. Especially the modified Poplar film faced plywood, it can used very well to form the perfect surface of concrete.
This article is from the "10631636" blog, please be sure to keep this source http://10641636.blog.51cto.com/10631636/1685509
The difference between film faced plywood and wood I joist beam
