Cause analysis:
If the error 0x000000ED is returned. It indicates that the fault is caused by a computer hard disk fault. In general, it may be caused by sudden power outages, host collisions, and loose hard disk data lines.
Solution: it is best to repair the hard disk to prevent such a problem or file loss from occurring next time.
The solution is as follows:
Step 1: go to the bios setup settings and call the BIOS default settings.
Note: generally, press DEL when the desktop is started, and press F2 when the notebook is started to enter bios setup settings. Then, select load bios defaults and press Y to agree. Just restart the computer.
Step 2: at the command line prompt, run the chkdsk/f/r command to check and fix file errors.
Of course, if you can log on to the system, directly enter the chkdsk/f/r command in the DOS environment. Then, the system will prompt you whether to check this volume the next time you start it, and enter y, in this way, the operating system will automatically repair the hard disk next time you restart the computer.
Note: There are many reasons for the blue screen, such as memory, motherboard, and hard disk. If: STOP: 0X000000ED appears, do not care, because it may cause data loss on your computer, causing heavy losses.
The above is an introduction to all the final restoration methods for Windows 7 with the error code 0x000000ed displayed on the blue screen. If you have the same problem, you can follow the above steps to set and solve it!