At present, many big cities have already covered wireless networks, and people can surf the Internet easily. One of the major advantages of wireless routing is the ability to practice and share the internet. Here we will introduce how to share the Internet through examples.
I just moved to a new house rented in the previous day. This area is connected to Great Wall broadband and uses the page verification method. The long and wide area seems to be the method of binding network cards, because there are three computers in the House that need Wireless routing to access the Internet, if you don't need to connect the network cable in the same room, you can purchase a tp-link 54 M wireless route and three 54M wireless network cards for a total of 640 yuan, (The price is not too expensive), and then we will go home to set up sharing.
First, set the hardware, plug the long and wide network cable into the wan port of the router, install the driver of the Computer Nic, and then restart it. The small signal bar on the computer's taskbar turns green, the signal strength is the same as that on the mobile phone.
Then open http: // 192.168.1.1 default password admin point setting wizard next select Ethernet bandwidth, automatically get the IP address dynamic IP address from the network service provider) next step with default next step to complete. Now, you need to copy the MAC address of the computer that can access the Internet through wireless routing to the vro to pass the long-width authentication.
MAC address clone note: the MAC address refers to the MAC address of the current router. the MAC address of the current management PC is the MAC address of the wireless network card used by the current computer, this computer uses the network cable to be directly inserted into the network card for verification when debugging by long and wide people. Therefore, we need to change the MAC address of the route here to the verified MAC address on this computer. the IP address runs IPConfig/all in Dos. Here, two NICS will clone the MAC that is locally connected to the NIC to the vro and save it. After restarting the route, you can perform WEB verification on any computer. Then, all local computers can access the Internet wirelessly. OK.
Tp-Line 54 M wireless route access speed is good, basically there is no big difference with the use of network cable only one advantage is good, laptop at home any location can be connected to the Internet without a network cable .. you can give it a try.