Tp-link routers how to set up Internet control network permissions

Tp-link Router set up the Internet to control the network permissions first step, set schedule

For example, a small business needs to realize that the manager's computer is unrestricted, all employees can only access specific websites and applications during work hours, and there is no limit to the Internet at any other time. According to the requirements, make the following configuration table.

Attention. The number parameters are for reference only and are defined according to the actual requirements when setting the rules.

Login to the Router management interface, click on the Internet Control >> Schedule >> add a single entry, adding working hours, as shown in the following figure.

Follow the same setting, adding rules for other time periods in turn, with the following general rules.

Tp-link Router set up Internet control network Permissions second step, set access target

1, fill in the target site domain name

Click on the Internet Control >> Access Goal >> add a single entry to the company site domain name (www.TP-link router. com.cn) as shown in the following figure.

2, fill in the target IP address

Add the access target to add the DNS service as an example.

Attention. You can also select the service you want to set up in the common service port number.

3. Add other rules

Use mail client software to send and receive mail, commonly used ports have. 25, 110, 53, Smtps Port 465, imaps Port 993,

QQ Login Common Port. 8000,443.

Add the rules in turn, as follows.

Attention. In this paper, the relevant parameters are only examples, the specific open port and destination IP address, the actual demand is whichever.

Tp-link Router set up the Internet to control the management of the network third step, set the host list

1, add Manager computer

Click on the Internet Control >> host List >> add a single entry, adding the manager computer's Mac, as shown in the following figure.

Attention. Set up Manager's MAC address, avoid other computer to modify IP address to get Internet access.

2, add the staff host

Because of the number of employees MAC address, add to the rule list will multiply, can be achieved by IP address segment, the following figure.

Attention. The IP address segment may include the manager's IP address, which, according to the matching rules, does not conflict.

Set the rules as follows.

Tp-link Router set up Internet control network permissions Fourth step, set access rules

1, add Manager access rules

Click on the Internet Control >> rule Management >> Add a single entry, add Manager computer access rules, as shown in the following figure.

2, add staff to the Internet rules

Add an employee Internet access rule to add a work time rule as an example.

Add the access rules for employees to send and receive mail, log on to QQ and non working hours in turn, after the setup is complete, the general rules are as follows.

Tp-link Router set up the Internet to control the network permission fifth step, turn on the Internet control function

After setting all the rules, click to open the Internet control, the default filter rule to select "usually in line with the set of Internet control rules of the packet, allow through this route", click Save.

Attention. The default rules selected here are filled in according to actual requirements, and "allow" is the white list of rules set, "Prohibit" is the set of rules for the blacklist.

At this point, the Internet control function settings completed. All computers in the office network will be applied to the Internet according to the rules set.