Tp-link WDS Bridge succeeds but can't surf the internet?

solution to Tp-link WDS Bridge success but no Internet access 1, check router settings

After you set up the WDS wireless bridge, the management interface bridge status of the login secondary router shows that the bridge is successful, but neither the computer's wired or wireless connection routers have access to the Internet. As shown in the following figure.

Note This article to the new router to guide, the interface of each router may be different, but the same method of troubleshooting.

1, verify LAN port IP and the main router is different

The LAN port IP address of the secondary router must be different from that of the primary router, otherwise the terminal in the network may not be able to access the Internet because of an address conflict.

It is recommended to modify the conflict-less IP address of the same network segment, for example, the IP address of the primary router is 192.168.1.1, and the IP address of the secondary router is modified to 192.168.1.X (2≤x≤254); The primary router is 192.168.0.1, the IP address of the secondary router is modified to 192.168.0.X.

2. Verify that the DHCP server is closed

Be sure to turn off the secondary router's DHCP server, or the terminal may obtain an IP address from the secondary router, causing the Internet to be unavailable. Make sure that only one DHCP server is left on the network. Locate the DHCP server in the Admin interface and click Close.

Note After you modify the LAN port IP address or shut down the DHCP server, be sure to reboot the secondary router to ensure that your computer gets the correct address.

Solution to Tp-link WDS Bridge success but not Internet access 2, check the main router settings

If the main router sets the Internet management function such as filtering or binding, the terminal connected to the secondary router will not be able to surf the Internet if it is not in the list. The following figure Internet Control list If you do not include terminals, you may not be able to access the Internet.

It is recommended that you turn off Internet control, parental controls, and ARP bindings (IP and MAC address bindings) that are set on the primary router and try to surf the internet again after shutting down.

Note that a lot of users are the above function set unreasonable cause bridge can not be connected after the Internet, please be sure to troubleshoot.

Solution to Tp-link WDS Bridge success but no Internet access 3, check signal strength

During setting up the bridging process, check the signal strength of the secondary router to the primary router. If the strength is weak, the communication between the two routers may be unstable.

Please close the secondary router to the main router and try the Internet again. When WDS wireless bridging, it is recommended that the secondary router search the primary router for a signal strength of more than 2 or greater than 20dB.

Solution to Tp-link WDS Bridge success but no internet access 4, loop cause problem

The loop can cause a broadcast storm, which affects the normal access to the computer.

During the WDS process, note

1, the use of WDS Bridge, the primary and secondary routers can not be connected between the network cable. The correct bridge is the following figure

2, if the primary and secondary routers are dual-frequency routers, can only use 2.4G or 5G a certain frequency band bridge, do not open at the same time two band of WDS. The following figure

Solution to Tp-link WDS Bridge success but no Internet access 5, compatibility issues

If you do not resolve the problem through the above troubleshooting, the wireless communication mechanism of the router may be the result of compatibility. You can try to use the primary router WDS wireless bridge pair router (the primary and secondary router role swap) to test for normal usage.

Note that a cloud router may not be able to open a WDS bridge when it is the primary router.