my ipaq hx2110 is in English. It is not configured after the Chinese Input Method is installed. The system almost crashes and cannot be used. You just want to upgrade it to wm6. The Upgrade tutorial found on the Internet should be developed by a Russian bull. Many Russian files can be found in the downloaded upgrade package, this upgrade process requires three rounds of flashing back and forth using different NBF files to go to wm6. It takes a long time, but it is still smooth.
1) hard reset ipaq. do this by holding the calendar button and itask button (curved arrow), and then put your stylus into the reset hole on the bottom of the ipaq. this will hard reset it.
2) after doing that, put it in to bootloader mode. you do this by holding the contact button (to the right of the calendar) and the itask arrow, and then clicking the reset button on the bottom. it shoshould now be in bootloader mode. unplug the power/USB cable and plug it back in. hit the calendar button. it shoshould now say USB.
3) Run hpruu.exe under the wm5.0 for hx2000_1.00.00.l_eng folder. it's found in provishki. it will flash your ipaq to 1.00.00.l. let it flash all the way.
4) hard reset the ipaq and put it in bootloader mode. see steps 1 and 2. make sure it says USB.
5) Do step 3 again, but this time don't click upgrade. rename the e1_upgrade_rom_v000000_00_l_signed.nbf file to 100l. NBF
tips. After the PDA is detected, after the Upgrade button is displayed, rename e1_upgrade_rom_v000000_00_l_signed.nbf file. The result is hpruu, indicating that my SKU number is incorrect and cannot be upgraded.
6) go into the sp32408_1.00.00.h_eng folder and get the NBF file from there. copy it into the 1.00.00.l folder that we were just in. rename is to e1_upgrade_rom_v1_00_00_l_signed.nbf. click upgrade. let the upgrade finish.
Go to the sp32408_1.00.00.h_eng folder and copy the NBF file
7) Repeat steps 1 and 2.
8) Delete the e1_upgrade_rom_v000000_00_l_signed.nbf file that you just copied over and rename the 100l. NBF file to e1_upgrade_rom_v000000_00_l_signed.nbf.
9) Run hpru.exe again. Do not click upgrade.
10) Get the wm6_wwe.nbf file and copy it into the directory we were just in. Rename emo-upgrade_rom_v1_00_00_l_signed.nbf to 100l. Old and wm6_wwe.nbf to begin
11) Click upgrade. Let it finish.
12) Repeat Step 1
You shoshould now have Windows Mobile 6 on your ipaq. Good luck
With my ipaq:
It is troublesome to download the original upgrade package, with more than 200 m, but in fact many files are not available for hx2110, so I made some streamlining and re-typed a new package, only 90 m.
Original package:
Http://depositfiles.com/en/files/1799963
My package:
Find the uploaded space and write it again.