Vswitch shared Internet connection method.

Vswitch shared Internet connection method.
The specific connection method is:

The broadband network cable of China Telecom is directly connected to the switch (if it is ADSL, the MODEM is also connected to the switch). It is used to set up the IP address of the host for dialing the Internet first. The local connection is displayed in the network connection, click to check the Internet protocol (ICP/IP) attribute in front of the icon displayed in the notification area after the connection, and use the following IP Address: 192.168.0.1, subnet Mask: 255.255.255.0; Default Gateway: 192.168.0.1; preferred DNS server: 192.168.0.1. click OK. Then, create an ADSL connection on the machine and click "select attribute-advanced" for "Easy to use" right Jian ". This will allow other network users to connect to the computer over the Internet.

Other hosts also use the local connection attribute of the right key point in the network connection. In addition to the first IP address, enter 192.168.0.2 (the value is 2 ~ 255), and the rest is the same as that of the first server.

In this way, the first machine to establish a connection enters the account and password to connect to the Internet. After the dial-up connection is established, other machines will naturally be connected.

Other machines can also be used as hosts, while other machines must have the same dial-up account and password,

(In fact, you don't need to set every server in this way. You just need to set one or two machines used by management personnel, but this method works, in addition, these connected computers have a fixed IP address in the LAN, which is also easy to manage)

This method is simple and convenient because only vswitches are used instead of vrouters sharing the Internet or proxy servers, and only one Nic is required for the dial-up host.