What should I do if the vro configuration page cannot be accessed?

Source: Internet
Author: User

Step 1: Set the IP address and gateway of the computer

The ADSL settings are implemented by accessing the configuration page through a browser. By default, the IP address of ADSL is 192.168.1.1. You only need to set the IP address on the computer connected to ADSL to the same network segment as that of ADSL to access the ADSL settings page, specifically, set the IP address of the computer to 192.168.1.X, X is generally greater than or equal to 2 and less than 255, and the gateway is set to 192.168.1.1. Then open the browser and enter the adsl ip address, namely 192.168.1.1, in the address bar, you can access the configuration page of ADSL. Here, the IP address is set to access ADSL, And the gateway is set to access the Internet later.

Step 2: Enter the default user name and password

You need to use the user name and verification password to access the ADSL Network. Generally, the default user name is admin, and the default password is also the lowercase letter admin. If not, please read your manual! Note that this user name and password are not the user name and password of the telecommunications company, but the user name and password of the ADSL device. Enter the correct information before entering the ADSL settings page.

Step 3: go to the ATM page and set the route

Click the ATM link to go to the settings page. Find the connection type option and select the single option of PPP. The PPP settings will be displayed in the lower part of the page. Set the user name and password in the PPP settings. the user name and password here are your account and password at the telecom or other ISP vendors, this setting is used for automatic dialing when ADSL is started.

Step 4: Set the DHCP Function

Each computer on the network has a separate IP address. In the same network, the IP address of each computer is unique. Generally, when we access the Internet, the IP address is automatically obtained in the computer. That is to say, when the computer is connected to the network, the server will automatically assign a unique IP address to the computer, just like the floor, line number, and seat number on your ticket when you enter the theater. However, in some LAN networks, a fixed IP address is used to facilitate software communication. That is to say, each computer has a fixed IP address and no identical IP address appears in the same network, just as every room in the building has a fixed number. If your network uses the previous IP Address allocation method, you need to enable the automatic IP Address Allocation Function of ADSL, that is, set DHCP. On the DHCP page, select the DHCP Server single option.

Step 5: Set DNS

Select the DNS page and set the DNS provided by the telecommunications company or other ISP vendors to ADSL. Generally, the DNS can be set to 202.101.224.68. 211.147.6.3 ...... It is best to fill in the local DNS server address

Step 6: Save settings

The preceding settings must be saved to take effect. On the "save" Page, save the settings. Disable the browser and turn off the ADSL power. The previous setting takes effect the next time the power is turned on.

Step 7: Modify computer settings

If you select the DCHP function, you need to modify the IP address that was modified to set ADSL. Select the IP address of your computer as the automatically obtained IP address, and add the IP address of ADSL, namely 192.168.1.1, to the gateway.

Step 8: restart your computer and turn on the ADSL power, so you can browse the Internet at will..

Security Tips: After you enable the ADSL routing function, your account and password are stored in ADSL, which is easy to be stolen by others. Therefore, it is best to modify the default ADSL password before saving the settings in step 5. Change the default MT800 password "admin" to another password to avoid easy access to your ADSL settings interface by others.

Software Upgrade: some versions of ADSL provided by telecom companies do not have the above settings interface, for example, the version number is V100P007C01B010SP01. At this time, you can use another software version to refresh your ADSL, just like upgrading your computer BIOS. In fact, you can use a lower version of software to refresh your ADSL, usually by flushing it to V100R006C01B010SP02. The refresh process is relatively simple. You only need to find the corresponding software and follow the instructions on the "software upgrade" interface of ADSL. If your ADSL model is exactly Huawei MT800, you can directly download and upgrade the software.

Other operations: You can also enter the corresponding parameters in the address bar to enter the corresponding settings interface, that is, enter 192.168.1.1/MainPage? The following table lists the values of id = X and X:

Function of setting page X for ADSL

Home page of SmartAX MT800 6 MT800ADSL settings

Page for configuring the routing function for ATM setting 25

Other settings

ADSL mode 51

LAN configuration 2

D

  1. Classic settings of TP-Link wireless routers
  2. How to enable remote router Login

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.