Win7 system computer to the U disk format operation prompts the "Windows cannot complete format" solution

Win7 System computer to the U disk format operation prompts the "Windows cannot complete the format" solution. u disk devices are often used, can be used to store, copy, transfer data. U disk equipment in the use of the process will also encounter a variety of strange problems, such as a recent user said in the Ghost Win7 system computer to the U disk format operation prompts "Windows can not complete the format," How to solve this problem? Next to the small series and you share specific solutions, Users who are experiencing this problem should take a look at the following troubleshooting steps.

Method One:

1, the first attempt to use the "360U Disk Authentication" tool to detect the actual capacity of U disk, in order to format the operation when choosing the appropriate "file system" type. When the U disk memory is greater than 1G less than 4G, it is recommended to use the FAT32 format for the format of the operation;

2, in the U disk to perform the format operation, in the pop-up "formatted removable Disk" window, click the "Restore Device Defaults" button, and then click the "Start" button to try to format the U disk;

3, select "Low-level format" u disk. In the formatted Removable disk window that opens, uncheck the Quick Format item, and then click the Start button to try to format the U disk.

4. Right-click Removable disk and choose Properties from the pop-up menu. And in the open window, switch to the "Tools" tab, click "Check error start detection";

5, in the pop-up window, make sure the first item is selected, and then click "Start Repair";

Method Two:

1, open the "Run" dialog box (press Win+r key can be opened), input "CMD" into the Msdos interface;

2, then enter the "format J:/fs:fat32" (Which J represents U disk) and press ENTER to perform the format of U disk operation;

3, when the pop-up as shown in the picture, indicating that the disk appears large panel bad, and may be damaged disk;

4, when the above error is prompted, due to the large panel bad road, resulting in the capacity of U disk can be reduced, so you can only use the "Fat" file system to format the U disk;

5, if the U disk bad way less, and the available capacity is greater than 512M, you can use the mass production tools to repair U disk.

About Win7 system computer to u disk format operation prompts "Windows can not complete the format" problem, refer to the above two methods to solve it.