Win7 under Adhoc Network settings shared external network internet

After two weeks of Adhoc mode network, with the NL6621 WiFi SOC chip set Adhoc mode with PC communication, in this review under PC-side settings, the PC must have a wireless card.

One, do not share the state of the external network settings:

1, first set up the wireless network card as a static IP:

Open "Network and Sharing Center" and go to "Change adapter settings",

This step is very simple, static IP settings, not much to say.

2. Create a temporary network (ADHOC network)

Go to "Manage wireless networks" in "Network and Sharing Center"

　　　　

"Add" a wireless network

Select "Create ad hoc network" and then set the SSID and password to successfully create the Adhoc network.

Tick "Save this network", or you'll lose the network after disconnecting.

In another computer with a network card scan wireless network, you can see the "test" network, join can be two computers to communicate. Remember that every computer that uses a adhoc network must be manually set to a static IP on the same network segment.

Second, the sharing of external network settings

First, in addition to this is a shared external network PC, each computer to turn on DHCP automatically obtain IP, that is, not set to static IP,DHCP default is open, as follows:

Set up the share, open the local Area Connection property, as

At this point, any PC connected to the "test" just created the Adhoc network, will automatically obtain IP, can share the Internet.

Win7 under Adhoc Network settings shared external network internet