Windows 7 editing startup options

Issue: After powering on, prompt to edit startup options:

"Path: \windows\system32\winload.exe partition: 1 HDD: f3c3f39 [/noexecute=optin]" ()

650) this.width=650; "Src=" https://s2.51cto.com/wyfs02/M02/9F/61/wKioL1mb6YCQjcLdAABKTowOkzU137.jpg-wh_500x0-wm_ 3-wmp_4-s_2392961476.jpg "title=" Windows 7 Edit startup option "alt=" Wkiol1mb6ycqjcldaabktowokzu137.jpg-wh_50 "/>

Steps to resolve:

1, press ENTER, after entering the operating system, view the startup item configuration msconfig ' Start ', but the configuration is correct without errors.

2, reinstall the system, and reboot the load, this thought is the system problem reinstall can, but after re-install problems still exist.

3. Press the DEL key to enter the BIOS setup, change the startup item to hard disk, click Save with Mouse (press F10 key not responding), the problem remains.

4, change a keyboard is OK, the problem is the keyboard on the F10 key, the test of the keyboard F10 failure (Figure 2)

650) this.width=650; "Src=" https://s3.51cto.com/wyfs02/M02/00/B2/wKiom1mb78aCnyoFAADHkeJTklY385.jpg-wh_500x0-wm_ 3-wmp_4-s_93214348.jpg "title=" Keyboard Detection "alt=" wkiom1mb78acnyofaadhkejtkly385.jpg-wh_50 "/>

Note:

1. When you install the system with U-Master, it always jumps out (is the power off?). ), it turns out that the F10 key is damaged.

2, in the BIOS setup, press F10 key also did not respond, only with the mouse operation.

This article from "Salted Fish not Salty" blog, please be sure to keep this source http://tommy2017.blog.51cto.com/10664462/1958391

Windows 7 editing startup options