Windows blue screen error code description list

Source: Internet
Author: User

0 0x0000: the job is completed.

1 0x0001 incorrect function.

2 0x0002 the system cannot find the specified file.

3 0x0003 the system cannot find the specified path.

4 0x0004 files cannot be enabled.

5 0x0005 Access denied.

6 0x0006 Invalid code.

7 0x0007 the bucket control block has been destroyed.

8 0x0008 the storage space is insufficient and the command cannot be processed.

9 0x0009 the address of the bucket control block is invalid.

The 10 0x000a environment is incorrect.

11 0x000b tries to load a program with an incorrect format.

12 0x000c access code error.

13 0x000d error.

14 0x000e the storage space is insufficient and the task cannot be completed.

15 0x000f the system cannot find the specified drive.

16 0x0010 cannot remove the directory.

17 0x0011 the file cannot be moved to another drive.

18 0x0012 does not have any files.

19 0x0013 the storage media is in the write protection status.

20 0x0014 the system cannot find the specified device.

The 21 0x0015 device is not ready yet.

The 22 0x0016 device cannot identify the instruction.

23 0x0017 data error (cyclic redundancy check)

The 24 0x0018 program sends out a long-time error command.

25 0x0019 the disk cannot find the fixed magnetic zone or track on the disk.

26 0x001a the specified disk or disk cannot be accessed.

27 0x001b drive cannot find the required magnetic zone.

The 28 0x001c printer has no paper.

29 0x001d the system cannot write data to the specified drive.

30 0x001e the system cannot read the specified device.

31 0x001f a device connected to the system does not work.

32 0x0020 the process cannot access the file because it is being used by another process.

A part of the 33 0x0021 file is locked and cannot be accessed now.

The disk of 34 0x0022 is incorrect. Please insert % 2 (volume serial number: % 3) into drive % 1.

There are too many shared files enabled at 36 0x0024.

38 0x0026 reaches the end of the file.

39 0x0027 the disk is full.

50 0x0032 does not support this network requirement.

51 0x0033 remote computer is unavailable.

52 0x0034 the network name is already in use.

53 0x0035 the network path cannot be found.

54 0x0036 the network is busy.

55 0x0037 the specified network resource or device is no longer available.

56 0x0038 the network BIOS command limit has been reached.

57 0x0039 network adapter problems.

58 0x003a the specified server cannot execute the required job.

59 0x003b an unexpected network error occurs.

60 0x003c remote adapter incompatible.

61 0x003d printer queue is full.

62 0x003e server space cannot store files waiting for printing.

63 0x003f the file to be printed has been deleted.

The network name specified by 64 0x0040 cannot be used.

65 0x0041 Access denied.

66 0x0042 the network resource type is incorrect.

67 0x0043 the network name cannot be found.

68 0x0044 exceeds the name limit of the regional computer network adapter.

69 0x0045 exceeds the network BIOS job stage limit.

70 0x0046 the remote server has been suspended or is starting.

71 0x0047 since the number of connections has reached the upper limit, you cannot connect to this remote computer.

The specified printer or disk has been suspended.

The 80 0x0050 file already exists.

82 0x0052 cannot create a directory or file.

83 0x0053 int 24 failed

84 0x0054 the storage body that handles this requirement cannot be used.

85 0x0055 the nearby device name is already in use.

86 0x0056 the specified network password is incorrect.

87 0x0057 parameter error.

88 0x0058 An error occurred while writing data to the network.

89 0x0059 at this time, the system cannot perform other itineraries.

100 0x0064 cannot create another system semaphore.

101 0x0065 belongs to semaphore for other travel purposes.

102 0x0066 semaphore has been set and cannot be disabled.

You cannot specify semaphore for 103 0x0067.

104 0x0068 cannot require a dedicated semaphore during the interrupt time.

105 0x0069 the previous ownership of this semaphore has ended.

106 0x006a Insert the disk into % 1.

107 0x006b the program has been stopped because the substitute disk has not been inserted.

108 0x006c disk in use or locked.

109 0x006d pipe has been suspended.

110 0x006e the system cannot enable the specified device or file.

111 0x006f is too long.

112 0x0070 insufficient disk space.

113 0x0071 no internal file Recognition Word is available.

114 0x0072 the target internal file is incorrectly identified.

117 0x0075 The IOCTL call executed by the application is incorrect.

118 0x0076 the write verification parameter value is incorrect.

119 0x0077 the system does not support the required commands.

120 0x0078 this function is only valid in Win32 mode.

121 0x0079 semaphore exceeds the timeout period.

122 0x007a the data area that is sent to the system call is too small.

123 incorrect syntax for file name, directory name, or bucket label 0x007b.

The 124 0x007c System Call level is incorrect.

0 0x0000: the job is completed.

1 0x0001 incorrect function.

2 0x0002 the system cannot find the specified file.

3 0x0003 the system cannot find the specified path.

4 0x0004 files cannot be enabled.

5 0x0005 Access denied.

6 0x0006 Invalid code.

7 0x0007 the bucket control block has been destroyed.

8 0x0008 the storage space is insufficient and the command cannot be processed.

9 0x0009 the address of the bucket control block is invalid.

The 10 0x000a environment is incorrect.

11 0x000b tries to load a program with an incorrect format.

12 0x000c access code error.

13 0x000d error.

14 0x000e the storage space is insufficient and the task cannot be completed.

15 0x000f the system cannot find the specified drive.

16 0x0010 cannot remove the directory.

17 0x0011 the file cannot be moved to another drive.

18 0x0012 does not have any files.

19 0x0013 the storage media is in the write protection status.

20 0x0014 the system cannot find the specified device.

The 21 0x0015 device is not ready yet.

The 22 0x0016 device cannot identify the instruction.

23 0x0017 data error (cyclic redundancy check)

The 24 0x0018 program sends out a long-time error command.

25 0x0019 the disk cannot find the fixed magnetic zone or track on the disk.

26 0x001a the specified disk or disk cannot be accessed.

27 0x001b drive cannot find the required magnetic zone.

The 28 0x001c printer has no paper.

29 0x001d the system cannot write data to the specified drive.

30 0x001e the system cannot read the specified device.

31 0x001f a device connected to the system does not work.

32 0x0020 the process cannot access the file because it is being used

By another process.

A part of the 33 0x0021 file is locked and cannot be accessed now.

The disk of 34 0x0022 is incorrect. Please insert % 2 (volume serial number: % 3) into the magnetic field

Disk % 1.

There are too many shared files enabled at 36 0x0024.

38 0x0026 reaches the end of the file.

39 0x0027 the disk is full.

50 0x0032 does not support this network requirement.

51 0x0033 remote computer is unavailable.

52 0x0034 the network name is already in use.

53 0x0035 the network path cannot be found.

54 0x0036 the network is busy.

55 0x0037 the specified network resource or device is no longer

Available.

56 0x0038 the network BIOS command limit has been reached.

57 0x0039 network adapter problems.

58 0x003a the specified server cannot execute the required job.

59 0x003b an unexpected network error occurs.

60 0x003c remote adapter incompatible.

61 0x003d printer queue is full.

62 0x003e server space cannot store files waiting for printing.

63 0x003f the file to be printed has been deleted.

The network name specified by 64 0x0040 cannot be used.

65 0x0041 Access denied.

66 0x0042 the network resource type is incorrect.

67 0x0043 the network name cannot be found.

68 0x0044 exceeds the name limit of the regional computer network adapter.

69 0x0045 exceeds the network BIOS job stage limit.

70 0x0046 the remote server has been suspended or is starting.

71 0x0047 since the number of connections has reached the upper limit, you cannot connect to this remote computer.

The specified printer or disk has been suspended.

The 80 0x0050 file already exists.

82 0x0052 cannot create a directory or file.

83 0x0053 int 24 failed

84 0x0054 the storage body that handles this requirement cannot be used.

85 0x0055 the nearby device name is already in use.

86 0x0056 the specified network password is incorrect.

87 0x0057 parameter error.

88 0x0058 An error occurred while writing data to the network.

89 0x0059 at this time, the system cannot perform other itineraries.

100 0x0064 cannot create another system semaphore.

101 0x0065 belongs to semaphore for other travel purposes.

102 0x0066 semaphore has been set and cannot be disabled.

You cannot specify semaphore for 103 0x0067.

104 0x0068 cannot require a dedicated semaphore during the interrupt time.

105 0x0069 the previous ownership of this semaphore has ended.

106 0x006a Insert the disk into % 1.

107 0x006b the program has been stopped because the substitute disk has not been inserted.

108 0x006c disk in use or locked.

109 0x006d pipe has been suspended.

110 0x006e the system cannot enable the specified device or file.

111 0x006f is too long.

112 0x0070 insufficient disk space.

113 0x0071 no internal file Recognition Word is available.

114 0x0072 the target internal file is incorrectly identified.

117 0x0075 The IOCTL call executed by the application is incorrect.

118 0x0076 the write verification parameter value is incorrect.

119 0x0077 the system does not support the required commands.

120 0x0078 this function is only valid in Win32 mode.

121 0x0079 semaphore exceeds the timeout period.

122 0x007a the data area that is sent to the system call is too small.

123 incorrect syntax for file name, directory name, or bucket label 0x007b.

The 124 0x007c System Call level is incorrect.

No tag is set for 125 0x007d disk.

126 0x007e the specified module cannot be found.

127 0x007f the specified program cannot be found.

128 0x0080 no sub-itinerary available for waiting.

The 129 0 x 0081% 1 application cannot be executed in Win32 mode.

130 0x0082 attempt to use a file handle to an open disk partition

An operation other than raw disk I/O.

131 0x0083 try to move the file indicator to the beginning of the file.

132 0x0084 the file index cannot be set on the specified device or file.

The 133 0x0085 join or SUBST command cannot be used to contain a previously combined drive.

134 0x0086 try to use the join or SUBST command on a combined drive.

135 0x0087 try to use the join or SUBST command on the replaced drive.

136 0x0088 the system tries to delete the link of an unconnected drive.

137 0x0089 the system tries to delete the replacement relationship of the drive that has not been replaced.

The 138 0x008a system tries to combine the drive to the directory of the attached drive.

139 0x008b the system tries to replace the drive disk with the directory of the disk that has been replaced.

The 140 0x008c system tries to replace the drive disk with the directory of the disk that has been replaced.

141 0x00 the system tries to convert the drive SUBST into a combined drive directory.

The 142 0x008e system cannot execute join or SUBST at the moment.

143 0x008f the system cannot combine or replace the drive with the directory on the same drive.

The 144 0x0090 directory is not a subdirectory of the root directory.

The 145 0x0091 directory still contains information.

The path specified by 146 0x0092 has been replaced.

147 0x0093 the command cannot be processed due to insufficient resources.

The 148 0x0094 path cannot be used at this time.

149 0x0095 try to combine or replace the drive Directory, which is already replaced.

The system tracing information is not specified in the 150 0x0096 config. SYS file, or the tracing function is canceled.

The number of DosMuxSemWait events specified by 151 0x0097 is incorrect.

152 0x0098 DosMuxSemWait is not executed; too many semaphore are set.

The 153 0x0099 DosMuxSemWait list is incorrect.

154 0x009a the length limit of the storage media element you entered.

155 0x009b cannot create other execution threads.

156 0x009c receives the request rejection signal.

The 157 0x009d segment has been discarded and cannot be locked.

158 0x009e has been unlocked.

The 159 0x009f thread ID address is incorrect.

160 0x00a0 the quote string uploaded to dosexecpgm is incorrect.

The 161 0x00a1 path is incorrect.

The 162 0x00a2 signal is waiting for processing.

The 164 0x00a4 system cannot create a thread.

167 0x00a7 unable to lock part of the file range.

The resource required by 170 0x00aa is in use.

The 173 0x00ad cancellation range does not have obvious locking requirements.

The 174 0x00ae file system does not support automatic locking change.

180 0x00b4 the system finds an incorrect segment number.

182 0x00b6 failed to run % 1.

The 183 0x00b7 file already exists and cannot be created.

186 0x00ba transmission flag error.

The system flag specified by 187 0x00bb cannot be found.

188 0x00bc failed to run % 1.

189 0x00bd job system failed to execute % 1.

190 0x00be failed to run % 1.

191 0x00bf cannot run % 1 in Win32 mode.

192 0x00c0 failed to run % 1.

193 0x00c1% 1 is not the correct Win32 application.

194 0x00c2 failed to run % 1.

195 0x00c3 failed to run % 1.

The 196 0x00c4 operating system cannot run this application.

The 197 0x00c5 operating system cannot run this application currently.

198 0x00c6 failed to run % 1.

199 0x00c7 the operating system cannot run this application.

200 0x00c8 the code segment cannot be larger than or equal to 64 KB.

201 0x00c9 failed to run % 1.

202 0x00ca failed to execute % 1.

203 0x00cb the system cannot find the input environment option. /R

205 0x00cd is in the sub-directory of the instruction, and there is no signal sub-processing program for any itinerary.

The 206 0x00ce file name or sub-file name is too long.

207 0x00cf ring 2 stack in use.

208 0x00d0 input common file name * or? Incorrect, or too many generic file names are specified.

The signal sent by 209 0x00d1 is incorrect.

210 0x00d2 cannot set the signal processing program.

The 212 0x00d4 segment is locked and cannot be reconfigured.

214 0x00d6 too many dynamic connection modules attached to this program or dynamic connection module.

215 0x00d7 can "" t nest callto loadmodule.

230 0x00e6 the pipe state is invalid.

231 0x00e7 all pipe instances are busy.

232 0x00e8 the pipe is being closed.

233 0x00e9 no process is on the other end of the pipe.

234 0x00ea has more available information.

240 0x00f0 job phase canceled.

The extended attribute name specified by 254 0x00fe is invalid.

255 0x00ff extended attributes are inconsistent.

259 0x0103 no available information.

266 0x010a cannot use the copy API.

267 0x010b directory name error.

275 0x0113 extended attributes are not applicable to the buffer zone.

276 0x0114 the extended attribute file on the external file system has been damaged.

277 0x0115 the extended attribute table is full.

The code for the extended attribute specified by 278 0x0116 is invalid.

The file system plug-in 282 0x011a does not support extended attributes.

288 0x0120 is intended to release mutex that is not called.

298 0x012a semaphore is transferred too many times.

299 0x012b only meets the requirements of Read/writeprocessmemory.

317 0x013d the system cannot find messages numbered 0x % 1 in the message file % 2.

487 0x01e7 tries to access an Invalid Address.

The calculation result of 534 0x0216 exceeds 32 bits.

The other end of the 535 0x0217 channel has a trip at the pick-up information.

536 0x0218 wait for the trip to start the other end of the channel.

994 0x03e2 access extended attributes are rejected.

995 0x03e3 terminates the I/O job abnormally due to the execution end or application requirements.

996 0x03e4 overlapping I/O events are not set to notification Status.

997 0x03e5 is processing overlapping I/O jobs.

998 0x03e6 invalid access to the memory location.

999 0x03e7 An error occurred while executing the inpage job.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.