When using wired routing + wireless routing to access the Internet and share wireless functions in an existing wired network, you can use a wireless router as a Wireless AP (Wireless switch). The configuration steps are as follows:
1. connect to and log on to the wireless router, and change the LAN port IP address of the wireless router, such as 192.168.0.1, to avoid conflicts with other devices on the Intranet.
DHCP function and restart to set wireless network security settings;
2. Connect the 1/2/3/4 port of the wireless router to the vro or vswitch in the Wired Network;
3. Connect the wireless network card in the operating network to the wireless route;
4. Configure the network parameters of the wireless network adapter (automatically obtained or manually configured, and manually configured parameters are consistent with those of the wired network );