zabbix-3.2.6 SNMP mode to monitor windows

One, adding SNMP in Windows

Add public and accept server IP addresses to the service.

Ii. Installing the NET-SNMP software in the Zabbix-server server

1. Modify the configuration file

[Email protected] tools]# vi/etc/snmp/snmpd.conf

# Third, create a view for us to let the group has rights to:# make on least  snmpwalk-v 1 localhost-c public system Fast again.#       name           incl/excl     subtree         mask (optional) view    SystemView    included   . 1.3.6.1.2.1.1view    systemview    included   1.3.6.1.2.1.25.1.1view    systemview    included   . 1     #增加这行proc mountd         #找到这些配置, remove the note, the following lines are the same proc NTALKD 4proc sendmail 1disk/10000load

#重启服务

[[Email protected] snmp]# service snmpd startstarting snmpd (via Systemctl):                            [  OK  ]

2. Test the client to see if it can connect

#有数据返回, this indicates that the configuration was successful. [[email protected] snmp]# snmpwalk-v 1-c public 192.168.30.141ipv6-mib::ipv6addrpfxlength.13. ' .............? W. '. integer:64 = bitsipv6-mib::ipv6addrpfxlength.15. ' ......... 0.7..\. '. 213 = integer:64 bitsipv6-mib::ipv6addrtype.1. ' ... '. 1 = integer:stateless (1) ipv6-mib::ipv6addrtype.11. '. '.. ' ......... 1...Ue. '. 158 = integer:stateless (1) ipv6-mib::ipv6addrtype.12. ' ......... 141 = integer:stateless (1) ipv6-mib::ipv6addrtype.13. ' ". .... 8.&lt, ...? W. '. = integer:stateless (1) ipv6-mib::ipv6addrtype.13. ' .............? W. '. = integer:stateless (1) ipv6-mib::ipv6addrtype.15. ' ......... 0.7..\. '. 213 = integer:stateless (1) ipv6-mib::ipv6addranycastflag.1. ' ... '. 1 = integer:false (2) ipv6-mib::ipv6addranycastflag.11. '. '.. ' ......... 1...Ue. '. 158 = Integer:false (2) ipv6-mib::ipv6addranycastflag.12. ' ......... 141 = Integer:false (2) ipv6-mib::ipv6addranycastflag.13. ' ". .... 8.&lt, ...? W. '. = Integer:false (2) ipv6-mib::ipv6addranycastflag.13. ' .............? W. '. = Integer:false (2) ipv6-mib::ipv6addranycastflag.15. ' ......... 0.7..\. '. 213 = Integer:false (2) ipv6-mib::ipv6addrstatus.1. ' ... '. 1 = integer:preferred (1) ipv6-mib::ipv6addrstatus.11. '. '.. ' ......... 1...Ue. '. 158 = integer:preferred (1) ipv6-mib::ipv6addrstatus.12. ' ......... 141 = integer:inaccessible (4) ipv6-mib::ipv6addrstatus.13. ' ". .... 8.&lt, ...? W. '. = integer:preferred (1) ipv6-mib::ipv6addrstatus.13. ' .............? W. '. = integer:preferred (1) ipv6-mib::ipv6addrstatus.15. ' ......... 0.7..\. '. 213 = integer:inaccessible (4) ipv6-mib::ipv6routenumber.0 = gauge32:10ipv6-mib::ipv6discardedroutes.0 = counter32:0

3. Create a host in Zabbix-server

Add a template, remember to click Add, then click Update

Waiting to get data

View the monitor chart

zabbix-3.2.6 SNMP mode to monitor windows