Problem one: "Solve press F12 cannot boot from U disk or CD"
Notebook Products
For V, B, K, E, M Series:
1. Boot F1 into the BIOS, select "Restart"-"OS optimized Defaults" The following figure:
2. Press "F9" to load the default settings, press "F10" to save exit, you can.
For Y,u,z,s,g series:
1. Press "F2" into the BIOS, some models need to press "FN" + "F2" into the BIOS, select "EXIT"-"OS optimized Defaults" will "Win 8 BIT" selected as "other OS". The following figure:
2. Press "F9" to load the default settings and press "F10" to save the exit.
Desktop:
1. Press F1, enter the BIOS, select Exit-os optimized Defaults, change "Enabled" to "disabled" as shown:
2. Press "F9" to load the default settings and press "F10" to save the exit.
Problem two: "Solve boot press F12 unrecognized boot hardware only appears ipv4*******,ipv6********"
As shown in figure:
Desktop:
Press F1 into the BIOS, horizontal penultimate option (Startup), the following is a boot priority option to change it to legacy first, as shown in figure:
Notebook
Press F2 or F1 into the BIOS, which is also a horizontal penultimate (boot), and one of the following (boot mode) changes "UEFI" to "Legacy first" as shown
Press F10 to save and exit.
Problem three: "Resolving partitions cannot be partitioned, there are two more partitions in front of partitions"
Solution:
1. The partition mode used by machines pre-installed with Windows 8 is GUID mode (GUID reference: http://www.diskgenius.cn/function/guid.asp), in which the partition defaults to more than two partitions. However, this mode cannot be used when installing Win7, so it is necessary to change the mode to MBR mode to properly partition, as follows:
Use the partitioning tool first (take diskgenius4.0 here for example), all partitions are deleted (before the user must be prompted to save the data), then click "Save", save the left mouse click on the right side of the software, in the middle of the pop-up menu, there is a "conversion partition table type for MBR mode" as shown:
After this four-step operation can be normal partitions, it is recommended to use the fast partitioning function.
Question four: "Automatic restart of machines with Windows 8 Systems pre-installed"
A G480 factory with Windows 8 system machine, users said they do not want to use the Windows 8 system, their own use of ghost, installed a Win7 system will appear after the automatic restart phenomenon, and press F2 can not enable the BIOS phenomenon, appears as follows diagram interface, Continue to cycle and restart.
This prompt appears, because can not enter the system, but by the previous machine, even if unable to enter the system will not appear constantly automatic restart, and at most is to stay in the interface, and restart can press F2 into the BIOS; but this machine is not, is constantly restarted and press F2 and F12 have no reaction;
Solution:
Press the button to restore the machine, the machine will automatically boot, the following image will appear:
From that box can enter the BIOS, and then according to the above "on the Windows 8 to change the system" method set, you can use a U disk to boot PE, need to reinstall the system can be solved.