Basic configuration of ztezte Switch

For example, management interfaces connecting the console to a vswitch through a serial port
Www.2cto.com open the Super Terminal on the computer to create a new terminal connection www.2cto.com set interface properties press the Enter key to enter the switch system enter the default Administrator admin zhongxing enter enable to enter the privileged mode password admin enter? You can view the HELP command to modify the switch name zte (cfg) # hostname 51cto to enter the layer-3 route Address Configuration Mode 51cto (cfg) # config router set the first port IP address to 192.168.0.1/24 51cto (cfg-router) # set ipport 1 ipaddress 192.168.0.1/24 set the first port to VLAN1 51cto (cfg-router) # set ipport 1 enable activation of Port 1 51cto (cfg-router) # set ipport 1 enableexit exit to privileged Mode set WEB management www.2cto.com Enable WEB function 51cto (cfg) # set web enable port redirection to 9999 51cto (cfg) # set web listen-port 9999 to set telnet to any mode (only access from specific hosts is allowed by default) 51cto (cfg) # Set remote-access any set the logon password 51cto (cfg) # set user local admin login-password denglu set the webpage management password 51cto (cfg) # set user local admin-password web save all configurations 51cto (cfg) # saveconfig Saving file, please wait a minute... done! (This prompt indicates that the switch is successfully restarted) once the switch 51cto (cfg) # reboot Press Y to restart Sure to reboot? [Yes | No]: y, then connect the network cable to the first port, and set the IP address of the computer to 192.168.0.2/24 ping 192.168.0.1 test link remote terminal management C: \> telnet 192.168.0.1 enter the configured password denglu to enter www.2cto.com and enter the configured WEB management address in the browser http://192.168.0.1:9999