Router tplink882 dial-up do not surf the internet?

Router tplink882 dial-up not to the Internet solution:

If the computer is already getting an IP address automatically, if you get an incorrect parameter, please disable the computer's local or wireless connection and enable it.

Note: If the router DHCP server is turned off, you need to manually configure the IP address on your computer, please fill in the correct gateway (administrative IP address), DNS server address (view DNS address in the routing management interface running status >> WAN status).

The parent control of the router, the Internet control (some routers are set up by the firewall) can restrict the Internet access to the intranet computer, please set the function according to the actual requirement, and do not enable the function if necessary. Set the method as follows:

1. Turn off Parental controls

Login to the Router management interface, click on the Parental Controls Settings page, choose not to enable and save. As shown in the following illustration:

2, off the Internet control

In the security Settings >> access control, confirm that the Internet control is not checked, click Save. As shown in the following illustration:

To do this, try opening the Web page test online.

On some broadband lines, broadband service providers bind the computer's MAC address and need to clone the Mac of a computer that was originally available to the Internet to the router's WAN port.

Set up method: Using network cable to connect the original Internet access computer and router LAN port, computer login Router management interface, click Network parameters >> MAC address cloning, click Clone MAC Address, save.

Check your browser settings and check the following methods:

Disable dial-up connection: Open IE browser, click Tools >> Internet Options, select connection >> never dial connection.

Disable Network agent: Click Tools >> Internet Options, select Connection >> LAN settings, make sure three options are not checked, and click OK. Go back to the previous Internet Options dialog box and click OK. As shown in the following illustration:

Set up, try to open the browser to the Internet.

Use a different terminal wired or wireless connection router to compare the test to see if the Internet is available. If other terminals can surf the internet, it may be a problem with the terminal (you can connect to other wireless routers for confirmation), and if other terminals are not available, try resetting the router reset.

Connect the computer directly to the broadband, test whether the normal access to the Internet, if the computer directly connected to the broadband is also able to dial success, but can not access the Internet, please contact the broadband service providers check the line.