How to solve the general tl-wr886n settings can not be connected to the Internet

solution to the general tl-wr886n set up after the network can not be a way to check the success of the Internet settings

After you log on to the Settings page, click "Run Status"--> and then in the right interface, there is a "WAN status" option.

If the IP address, subnet mask, gateway, and DNS options below the WAN Status option Show all 0, the connection to the tl-wr886n, or the settings are problematic, causing the internet to be disabled.

"WAN status" displays all 0, indicating that the tl-wr886n setting was unsuccessful

If the IP address, subnet mask, gateway, DNS option is followed by an IP address parameter under the WAN status option, the tl-wr886n Internet setting is successful. At this time can not surf the internet, may be the computer IP settings, computer connections and other factors caused.

"WAN status" has an IP address parameter stating that the TL-WR886N setting was successful

Important Notes

V4-V5 version of the tl-wr886n router, login to the Settings page, you can click the "Common Settings"--> "Internet Settings" view, as shown in the following figure, if the IP address, the DNS server after all is 0, indicates that the tl-wr886n connection, set up a problem.

V4-V5 version tl-wr886n, under Internet settings, to see if the connection was successful

Solution to the general tl-wr886n set of the method can not be connected to the Internet second, networking failure, can not access the Internet

If your tl-wr886n router has a "WAN status" option, all 0 shows that the tl-wr886n router networking failed. To access the Internet via the tl-wr886n router, you must ensure that the IP address under the WAN Status option and the IP address parameters are followed by the DNS server, as follows:

1, check the tl-wr886n router connection

(1), broadband is the telephone line access: need to prepare 2 short network cable, a network cable used to connect the tl-wr886n router Wan interface and ADSL Modem (CAT); Another network cable is used to connect any of the interfaces in the tl-wr886n router LAN (1, 2, 3, 4). The network cable connects the computer to the other end, as shown in the following figure.

Broadband is the correct way to connect the router when the telephone line is connected

(2), broadband is optical access: Please prepare 2 network cables, one network cable used to connect the tl-wr886n router WAN interface and the light cat; another cable is used to connect any one of the tl-wr886n router LANs (1, 2, 3, 4), and the network cable is connected to the computer, as shown in the following illustration.

When broadband is a fiber-optic access, the router is properly connected

(3), broadband is a household network cable access: Please prepare 1 network cable, first the operator provided by the household network cable inserted in the WAN interface tl-wr886n router, and then put their own network cable, a connection to the computer, the other end of the tl-wr886n router LAN (1, 2, 3, 4) any one interface.

Broadband is a broadband cable access, the router is the right way to connect