Installing the remote Boot service on a Windows XP system

Required Software: DLC protocol program, extract downloaded files into a directory (such as D:XPRPL), note If you are using a 10/100 Adaptive network card, be sure to connect the other end of the network cable to boot, that is, to ensure that "local connection" is enabled, in the "Local connection" Select < install > , select the protocol from disk installation, locate to the XPRPL directory, you can successfully install the DLC protocol.

As shown above, the DLC protocol has been added to the "local connection" in the implementation of the Xprpl.exe appears to be Ling Center Win2000 wrote RPL installation program, YASUTERU requirements to add a good NetBIOS ipx/spx DLC Protocol, NETBEUI Protocol no longer support also use, put a WinNT4 sever the full version of the CD-ROM, determined after the installation started;

Do not follow the prompts to restart the computer, and then copy the XPRPL directory Dlcapi.dll to Windowssystem32, Netui0.dll to RPL directory, restart the computer, if you are as lucky as I can after the restart, in the "service" to see " The remote Boot service "has been started;

Run RPLrplmgr.exe to open the remote boot manager and run Rplcmd to add information to the NIC