Learn to use router port ing

Many people like to set up a website or email system on their personal computers, but they do not want to be accessed by others for privacy reasons. Therefore, you only need to set a ing on the vro, A router and a computer connected to the route can be completed. The procedure is as follows:

Open the control interface of the router, as shown in.

Then go to the forwarding rule column and select virtual service:

Here you will have a little understanding of the information described in each topic. For example, the first service port number refers to the Open Port Number of the server you created, and the IP address is your intranet IP address, the default value is 192.168.1. * after entering the required information, click Select to take effect and save it. Then, restart the vro.

In fact, there are some differences between different brands and models of routers, but the settings in the topic are basically the same as above. You can refer to the instructions when setting them.

Another problem is that the link IP address is a dynamic IP address. When we access the website, we need to install a dynamic IP service software to access the external network.