Switch Configuration items:
1. Name, Local-user XXXX
2. Password, password cipher XXXX;
3.ACL 2000 list:
Rule 1 Permit Source 10.1.0.1
Rule 3 Permit Source 10.1.0.2
4. Enter VLAN1 to set the management IP and default gateway for the switch:
IP address 10.2.0.XXX 255.255.255.0
5. Set a gateway with a default route of VLAN 1:
IP route-static 0.0.0.0 0.0.0.0 10.1.0.254
6. Partitioning VLANs
7. Authorization level is 3
Authorization-attribute Level 3:
8. Set up SSH remote connection
Service-type ssh terminalssh:
9.SSH Service Available
SSH server enable SSH user XXXX Service-type stelnet authentication-type Password
10. Configure SSH Login to generate RSA and DSA key pair
Public-key Local Create RSA
Public-key Local Create DSA
11.user-interface aux 0
Authentication-mode scheme
User-interface vty 0 4
ACL Inbound
Authentication-mode scheme
Protocol Inbound SSH
User-interface vty 5 15
Ps:save!!!
Switch Configuration Items