CentOS

My VPs is relatively idle, and the company needs to build a PHP online shop. I can just use my VPs to save a few hundred yuan of Space purchase costs. However, if the website is not managed by me, you need to grant the FTP permission to your

The newly installed server may be set incorrectly. You need to adjust the time zone and adjust the time as follows: Use NTP to synchronize data from a time server. CP/usr/share/zoneinfo/Asia/Shanghai/etc/localtime Ntpdate us.pool.ntp.org

(1) [root @ bogon test] # cd/etc/sysconfig/network-scripts/(2) [root @ bogon network-Scripts] # vi ifcfg-eth0(3) # Intel Corporation 82566dm-2 gigabit network connectionDevice = eth0Bootproto = noneBroadcast = 10.20.0000255Hwaddr = 00: 1E: 4f: D6:

Install pythonmagick and pythonmagickwand Install dependency Library Yum install automakeYum install pkgconfigYum install libtoolYum install gcc-C ++Yum install boost *Yum install ImageMagick * # Wget

You may have encountered ifconfig input in terminal mode, and the system prompts that this command is unavailable. How can this problem be solved )? Add it to the system environment variable... ====================================================

Build vsftpd server in centos 6.2 First check whether FTP is installed:Rpm-Qa | grep vsftpd   1. If the installed centos does not have the FTP command, it is likely that this step is ignored during the installation process.Yum install

ArticleDirectory System Environment Fault Cause Solution Practical drills System Environment Centos 5.3 64bit GCC 4.1 EMC 2.2   Operation Purpose Compile the EMC module into. So from

Because the root user has full operation permissions on the system, in order to avoid some mistakes, we recommend that you log on to the system as a general user. If necessary, you need root operation permissions, then, run the "Su-" command to log

After the system is installed, centos cannot access the Internet. ifconfig finds that no IP address is configured. Modify IP Address /Etc/sysconfig/network-scripts/Ifcfg-eth0, if it is multi-nic, In this push Modify:Onboot = "NO" isOnboot = "

Webmin is a powerful management UI in Linux and is standard for general servers.   Download the Installation File Wget http://prdownloads.sourceforge.net/webadmin/webmin-1.580.tar.gz Install SSL first Yum install OpenSSL Edit the firewall

When you configure phpMyAdmin, enter http: // 192.168.8.250/PHPmyAdmin/in the browser/ You also encountered the problem of you don't have permission to access on this server. I found a lot of information on the Internet, some of which are the

Problem description: to minimize the installation of centos, there is no graphical interface by default. This is exactly what I want. However, the command line interface is very small, and many outputs are forced to write with line breaks, affecting

1. First, check that fuse is included in centos 5.5. You can use rpm-Qa | grep fuse to check whether the fuse is installed.   [Root @ localhost ntfs-3g-2010.5.22] # rpm-Qa | grep Fuse Fuse-2.7.4-8.el5   Fuse has been installed       If not, execute  

1. Install epel Repo Rpm-uvhHttp://download.fedora.redhat.com/pub/epel/5/x86_64/epel-release-5-4.noarch.rpm 2. Install memcacheYum-y install memcached The following problems may occur during installation:--> Missing dependency: Perl (net: ssleay)> =

  Very strange ~ The server is in centos 64bit init 3 mode.You can log on remotely through SSH, but the monitor cannot directly connect to the keyboard.Entering the correct account and password on the logon page will return to the logon

Centos5.4 was installed the day before yesterday. When installing centos5.4, you can get started with basic OK. When installing centos5.4, you can enter the system OK, but the Chinese characters are garbled. You have edited/etc/sysconfig/i18n and

Cannot I connect to the Internet after the minimum installation? Find the network configuration method: Under the command line Ifconfig eth0 192.168.137.117 netmask 255.255.255.0route add default GW 192.168.137.1echo "nameserver

Author: gnuhpcSource: http://www.cnblogs.com/gnuhpc/ This article takes the Shanghai Jiao Tong University update source of centos5.3 as an example:1. Modify/etc/yum. Repos. d/CentOS-Base.repo:[Base]Name = CentOS-5-Base# Items list =

Because the default CentOS kernel is 2.6.18, You need to upgrade the kernel. It's easy to upgrade the kernel to 2.6.27, but it took me a long time to upgrade the kernel to 2.6.28. Upgrade to 2.6.27Wget

1,Software A) download jdk address, this document sample jdk for jdk-6u32-linux-x64.bin,: http://download.oracle.com/otn-pub/java/jdk/6u32-b05/jdk-6u32-linux-x64.bin B) unless otherwise stated, this document serves as the root